7556 (Type 2) Porter Cable Electric Drill - Overview

This Ball Bearing has metal shielding on both sides. This is a genuine Porter Cable replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This ...Read morereduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This is a Ball Bearing that is sealed on both sides. This is a genuine Porter Cable replacement part that is sold individually. • Ball bearings minimize friction between 2 parts in your tool that would otherwise spin and rub against each other. The balls or rollers take the load and spin, distributing the weight evenly while the mi...Read morenimal contact area of the balls reduce friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually. Included in part number 381004-00 spindle assembly.

This is a genuine Porter Cable replacement part, it is sold individually. A Cord Strain Reliever is used on most all power tools. It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.

It is an authentic manufacturer-supplied washer which is made for use with Black and Decker, Porter Cable and DeWALT power tools. This is one of the insulators for the carbon brush. It is an identical replacement for a missing or a damaged hardware that was installed on a new tool. Check the parts diagram for your model to ensure the corr...Read moreect repair procedure. Note, this high-quality brush insulator is made of durable material and is sold as an individual item.

This is an authentic replacement part, sourced from the original manufacturer for use with electric power tools. The special brush holder is used to secure the carbon brushes. This brush holder is available as an individual replacement part, please note two brush holders are required.

Genuine Porter Cable replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can rest...Read moreore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine Porter Cable product sourced from the original manufacturer, not an aftermarket imitation. The tube of grease is 5.5 ounces, and is used to lubricate various kinds of equipment, and power tools. This tube of grease is sold individually, please see model diagram for compatibility, and usage.