75372 Porter Cable Router - Overview

Reduce friction and extend tool life with this genuine manufacturer-sourced ball bearing. Made of durable metal, this high-quality replacement part is designed for use with a variety of equipment from trusted brands. Ball bearings play a critical role in minimizing friction between rotating parts—distributing weight evenly and allowing co...Read moremponents to spin smoothly. This helps reduce wear, improve efficiency, and ensure long-lasting performance. Bearings are subject to constant pressure, heat, vibration, and friction during operation, which means they may require periodic maintenance or replacement. This part is sold individually and is also included in part number 395843-00. For proper installation and compatibility, refer to your equipment’s diagram or manual.

This is a metal spring type cord protector. It is a genuine OEM replacement part for Porter Cable routers. It is attached where the power cord connects to the machine. This strengthens and protects cord from strain while also reducing chance of internal wire damage. This is a fairly simple repair and can be done while replacing a cord. Da...Read moremaged cords should always be replaced. One (1) cord protector included. Replacement cord sold separately. • Make sure tool is unplugged • Remove the housing • Disconnect cord/wires from router • Slide cord through spring (with wide part towards machine) • Reconnect wires • Reassemble and test router

This is an Authentic Manufacturer Approved replacement part used on Routers. This part provides a firm grip for holding a bit in a tool. It is made out of Metal and is Sold Individually. This Collet is for using bits with 1/2" arbors only. Includes the 1/2" Collet and a Collet Nut. Due to prolonged, heavy use a Collet may need to be repl...Read moreaced eventually. To replace this Collet you would need to use a Wrench. • First you would need to remove the Collet Nut • Once the Nut is removed you can remove the old Collet • Place a new one in place • Tighten the Collet Nut back in place and your unit is ready to use 1/2" Bits

It is an authentic item which is supplied directly from the original equipment manufacturer for use with electric power tools. This high-quality screw is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and application of...Read more this part. Keep in mind this part is made of durable metal and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with routers, drill, and screwdrivers. The pan head screw is used with several different types of tools and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part, please see illustrated diagram for part location and usage.

This is an original Rorter Cable replacement part manufactured for use with routers. The switch has two positions and is used to send power from the cord to the motor. Power tool switches do eventually wear out, and a good indication that the switch is worn is that the tool begins to run intermittingly. This switch is sold as an individual replacement part.

This genuine OEM sourced replacement part is specially produced for use with Porter Cable and Black and Decker router. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality metal and is sold individually, you will need a Phillips head screwdriver to secure or remove it.

This replacement fan is a genuine OEM sourced item designed for use with Black and Decker and Porter Cable routers. This is the main fan for the armature. This fan is made from durable plastic and it is sold individually. To complete this repair you will need a screwdriver.