7430 (Type 1) Porter Cable Sander Grinder - Overview

This is a genuine DeWalt replacement power cord, specifically designed for use with double-insulated tools. Built for durability and safety, it features two wires and two prongs, eliminating the need for a ground wire. The cord measures 8 feet in length and uses 18-gauge wiring, offering a reliable connection and flexible reach for your p...Read moreower tool needs. It’s sold individually and is compatible with the models listed below. Installation requires careful attention: the new cord wires must be properly inserted into the wire terminals, and the cord should be routed correctly to avoid pinching when reassembling the tool’s case or plate. For best results, refer to your tool’s manual or consult a professional technician.

This is replacement ball bearing is a commonly used item on a variety of power tools. Bearings are specially designed to allow connected parts to rotate smoothly. The way it is build it will minimize friction between the rotating parts. This is a sealed metal bearing generally used with an armature. Includes one (1) bearing per order. St...Read moreeps to replace this bearing would be different from one model to another. However, general steps to complete this repair would be the same. You may need a screwdriver and pliers to finish this job. • Make sure the unit is unplugged • Remove the cover/housing • Disengage the brushes • Remove the armature • Remove the old bearing • Install the new bearing • Reassemble unit and test the equipment

Included in part number 882350

This is an authentic replacement part that has been sourced from the original manufacturer to be used with drills, screwdrivers, circular saws, angle grinders, plate joiners, and reciprocating saws from Porter Cable, Black and Decker, and DeWalt. The screw is used with several different types of tools and the application of the screw can ...Read morevary based on the model of the equipment. It is recommended to review your model's illustrated diagram to confirm the screw's compatibility and usage. The screw is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Porter Cable and Black and Decker equipment. This is an identical replacement for a missing or damaged bearing mount that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct loca...Read moretion and application of this hardware. Keep in mind this high-quality item is made of durable material and is sold individually.

This is an authentic replacement part manufactured for use with angle grinders, plate jointers, laminate trimmers, sanders, bayonet saws, and a drywall gun. The screw has several different applications depending on the model of the tool. This screw is sold as an individual replacement part, please see model diagram for part location and usage.

This cord protector is a genuine Porter Cable replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched. Which can expose the wires and become a safety hazard.

Included in part number 882350

The purpose of this brush holder base is to secure the carbon brush against the armature. It is an authentic item that is supplied by original equipment manufacturer for use with Porter Cable and Dewalt power tools. Please note this durable plastic item is sold individually.

This Torsion type brush spring is an authentic Porter Cable replacement part. It is sold individually.