My Orders
73153 LG Refrigerator - Overview
Models starting with 73153
Click on the best match to narrow your results.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$41.67
In Stock
Air Cleaner Filter Assembly
Part #ADQ73214408
This air filter helps keep your fridge smelling fresh and your food lasting longer. It uses carbon to trap odors and clean the air inside your refrigerator. If you notice bad smells or your fridge tells you it’s time, it’s probably time to replace the filter—usually every six months. It fits LG and some Kenmore Elite models. To install, j...Read moreust turn off the power, swap out the old filter, and reset the filter light once the new one’s in place.
Read less
$82.45
In Stock
Door Bin
Part #AAP73252202
Add useful storage space inside a refrigerator door with this clear plastic door bin. It holds bottles, jars, drinks, and condiments where they are easy to see and reach. The bin measures about 13-1/2 inches wide and 4-1/4 inches high. Its shaped base is about 9-1/2 inches deep on one side and 10-1/8 inches deep on the other. Installation...Read more requires no tools. Place the bin slightly above the mounting points, then slide it down until it locks into place. Compare the size, shape, and side mounts with the original bin before ordering.
Read less
$13.15
In Stock
Handle Screw
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
Read less
$60.45
In Stock
Door Shelf Bin Assembly
Part #AAP73252302
This refrigerator door shelf bin is a clear, gallon-sized storage accessory designed for installation on the right-side door of select refrigerator models. Crafted from durable, food-safe resin, it features a transparent body with a white band along the top edge, allowing easy visibility of stored items. Measuring approximately [insert di...Read moremensions if known], it provides ample space for organizing beverages, condiments, and jars. Installation is straightforward and requires no tools, making it a convenient replacement option. While primarily designed for specific refrigerator models, it’s important to verify compatibility before purchase. Some versions may include an integrated soda can organizer for added functionality.
Read less
$40.65
In Stock
Ice Water Tube Assembly
Part #AJR56656503
$120.78
In Stock
WATER INLET VALVE
Part #AJU72992603
$35.15
In Stock
Micro Switch
Part #6600JB3001C
$38.19
In Stock
Water Filter Bypass Plug
Part #ABN73019101
$324.43
In Stock
Refrigerator Ice Maker
Part #AEQ73130004
Designed for efficient ice production, this ice maker assembly includes the ice mold and control unit that work together to freeze and release ice. Water enters through the inlet valve and is held in the mold until it freezes solid. The control device then initiates the release of the ice into the storage bin. This component helps maintai...Read moren a steady supply of ice and is compatible with various refrigerator models. For safety, disconnect power before installation and refer to your appliance’s manual for guidance.
Read less
$67.05
In Stock
Freezer Door Gasket
Part #MDS38201426
Frost near the door or a freezer that runs often may have a damaged door seal. The flexible gasket blocks room air and moisture from entering the cold compartment. First clean the seal and contact surface, then check the hinges and door fit. Match the replacement to the complete freezer model and door position. If shipping leaves folds, s...Read moreoak the gasket in warm water for 5 to 10 minutes or use a hair dryer on low. Do not overheat the rubber. Smooth each side, close the door, and test the seal with a strip of paper.
Read less
$13.15
In Stock
Clip
Part #4004JA3002A
$96.19
In Stock
Refrigerator Water Filter
Part #AGF80300801
This water filter helps make your fridge’s water and ice cleaner and better-tasting by removing things like chlorine and lead. It’s easy to install—just twist out the old one and twist in the new one. You’ll want to change it every six months or when the water starts slowing down. After putting it in, run about four gallons of water throu...Read moregh to clear out any leftover carbon. It’s a quick way to keep your water fresh and your fridge working well.
Read less
Exact Part matches for your search term
No Longer Available
No Longer Available
No Longer Available
Common Symptoms of models starting with 73153
How this model fails, and the parts that fix it.
Door Sweating
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced Old Molded Gasket with new one
9 of 9 people
found this instruction helpful.
For the right side of the refrigerator door, just pulled off the old gasket and replaced it with the new one. Old gasket came off easily. Just had to pull it off. No screws on the right side. Just pushed the new one in place in the groove on the door.
For the left side, needed a Phillip’s screwdriver to remove the flap first. H ... Read more elps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.
Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
For the left side, needed a Phillip’s screwdriver to remove the flap first. H ... Read more elps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.
Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Moldy and torn gaskets
5 of 6 people
found this instruction helpful.
Once I U tubed the the removal and replacement of the gaskets it was super easy. The right gasket change was easy without tools. The left gasket required me to remove the mullion first, which is why I used Utube.
Other Parts Used:
Was this helpful?
Thank you for voting!