72482 LG Refrigerator - Overview
Sections of the 72482
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 1 of 1]
SVC-PIPE BTWN SPINNERS
This part number matches the current model number 72482
PartSelect #: PS17504651
Manufacturer #: DD81-03305A
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Door Bin
PartSelect #: PS3637058
Manufacturer #: AAP73252202
Add useful storage space inside a refrigerator door with this clear plastic door bin. It holds bottles, jars, drinks, and condiments where they are easy to see and reach. The bin measures about 13-1/2...
$82.45
In Stock
Order within the next 4 hrs and your part ships today!
Handle Screw
PartSelect #: PS8752913
Manufacturer #: MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$13.15
In Stock
Order within the next 4 hrs and your part ships today!
Ice Water Tube Assembly
PartSelect #: PS3533046
Manufacturer #: AJR56656503
$40.65
In Stock
Order within the next 4 hrs and your part ships today!
Door Shelf Bin Assembly
PartSelect #: PS3637059
Manufacturer #: AAP73252302
This refrigerator door shelf bin is a clear, gallon-sized storage accessory designed for installation on the right-side door of select refrigerator models. Crafted from durable, food-safe resin, it fe...
$60.45
In Stock
Order within the next 4 hrs and your part ships today!
Refrigerator Ice Maker Kit Assembly
PartSelect #: PS9865155
Manufacturer #: AEQ73110210
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
$244.62
In Stock
Order within the next 4 hrs and your part ships today!
WATER INLET VALVE
PartSelect #: PS3618979
Manufacturer #: AJU72992603
$120.78
In Stock
Order within the next 4 hrs and your part ships today!
Evaporator Fan Motor
PartSelect #: PS10058947
Manufacturer #: EAU61524007
$104.62
In Stock
Order within the next 4 hrs and your part ships today!
Air Filter
PartSelect #: PS3654115
Manufacturer #: ADQ73214404
Refrigerator Air Filters are a key component for neutralizing odors and ensuring a fresh stream of air into your refrigerator. Swapping your old filter out for a fresh one isn’t difficult and should t...
$55.90
On Order
Door Basket Assembly
PartSelect #: PS3637062
Manufacturer #: AAP73351301
$75.85
In Stock
Order within the next 4 hrs and your part ships today!
Defrost Sensor Assembly
PartSelect #: PS3529165
Manufacturer #: 6500JB2001B
$36.25
In Stock
Order within the next 4 hrs and your part ships today!
Compressor
PartSelect #: PS12739218
Manufacturer #: TCA38151706
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is nee...
$390.07
In Stock
Order within the next 4 hrs and your part ships today!
Tube Connector
PartSelect #: PS3583936
Manufacturer #: 4932JA3002C
$31.85
In Stock
Order within the next 4 hrs and your part ships today!
Common Symptoms of the 72482
[Viewing 7 of 7]Ice maker not making ice
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ICE MAKER JAMED WOULD NOT ROTATE
REMOVED 3 SCREWS AND OUT IT CAME UNPLUG THE HARNES AT THE TOP YOUR NONE
Parts Used:
-
JOHN from LUDINGTON, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
14 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker Can’t Rotate/Discharge Ice
First, remove power to the refrigerator.
To replace the ice maker you first have to remove the back mounting assembly, which ice maker is attached to.
Only three Phillips head screws need to be removed: 2 on the bottom and 1 on the back of the ice maker mounting assembly. Do not remove the two diagonal Phillips head screws holding the dispenser motor on the reverse side of the mounting assembly.
As you pull out the mounting assembly to the front you will see a connector on the top inside, which must be unplugged. A narrow standard screw driver will help the connector lock to release; slide the screwdriver tip under the connector lock clip and it will allow the connector to be unplugged.
Once the ice maker mounting assembly is removed and placed on a flat surface it will be self evident as to how to remove and replace the ice maker. The 1” tape might be needed during the cable re-routing process. However you can reuse the original tape required to be removed during the ice maker remove and replace process, if possible.
Reinstall the ice maker mounting assembly in the reverse order it was removed.
Apply power to the refrigerator.
Cycle the ice maker to Off and then back to On. It may take an hour or two before the ice maker produces ice because the temperature inside the ice maker must reach “0” degrees Fahrenheit before it will begin making ice.
Pull the ice maker
To replace the ice maker you first have to remove the back mounting assembly, which ice maker is attached to.
Only three Phillips head screws need to be removed: 2 on the bottom and 1 on the back of the ice maker mounting assembly. Do not remove the two diagonal Phillips head screws holding the dispenser motor on the reverse side of the mounting assembly.
As you pull out the mounting assembly to the front you will see a connector on the top inside, which must be unplugged. A narrow standard screw driver will help the connector lock to release; slide the screwdriver tip under the connector lock clip and it will allow the connector to be unplugged.
Once the ice maker mounting assembly is removed and placed on a flat surface it will be self evident as to how to remove and replace the ice maker. The 1” tape might be needed during the cable re-routing process. However you can reuse the original tape required to be removed during the ice maker remove and replace process, if possible.
Reinstall the ice maker mounting assembly in the reverse order it was removed.
Apply power to the refrigerator.
Cycle the ice maker to Off and then back to On. It may take an hour or two before the ice maker produces ice because the temperature inside the ice maker must reach “0” degrees Fahrenheit before it will begin making ice.
Pull the ice maker
Parts Used:
-
Paul from CLEARFIELD, UT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice would stick in 5 of the 14 cubes spaces from mineral deposits, then ice couldn't drop and water would not fill
was easy watching youtube video of how to replace whole ice maker, was only 3 screws, remove from the door, a couple of screws hold it to the flat piece, route the wires around the unit, connect the plug as installing it in the door, position it, and tighten 3 screws, that easy
Parts Used:
-
Scott from MORGAN, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!