71053 (ASTCSE4) LG Refrigerator - Overview
Sections of the 71053
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Front Plate Assembly
PartSelect #: PS12374439
Manufacturer #: AGU75188619
If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to kee...
$200.17
In Stock
Refrigerator Door Bin
PartSelect #: PS7786021
Manufacturer #: AAP73631503
14 inches wide, 7-5/8 inches deep and 3-3/4 inches tall;
$81.63
In Stock
Water Inlet Valve Assembly
PartSelect #: PS3533117
Manufacturer #: AJU72992601
This includes the primary and secondary valves along with the wire harness.
$269.48
In Stock
Handle Screw
PartSelect #: PS8752913
Manufacturer #: MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$18.96
In Stock
Glass Shelf
PartSelect #: PS8737453
Manufacturer #: MHL62691504
This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cov...
$80.62
In Stock
ROLLER ASSEMBLY
PartSelect #: PS7788846
Manufacturer #: AHJ73329901
This roller assembly supports smooth movement of racks, drawers, or drums during operation. Reduced friction improves ease of use and reduces wear. Replacing a worn roller restores quiet, smooth movement.
$18.96
In Stock
Door Gasket - Gray - Right Side
PartSelect #: PS8737433
Manufacturer #: ADX73550624
This door gasket is used to make an air-tight seal for the cabinet when the door is closed
$74.71
In Stock
Secondary Water Inlet Valve
PartSelect #: PS6448332
Manufacturer #: MJX41869202
This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to ...
$132.70
In Stock
Refrigerator Spring
PartSelect #: PS6012670
Manufacturer #: MHY62044106
If your French-door fridge isn’t sealing like it used to, this mullion spring could be the fix. It helps the flap between the doors close smoothly and stay in place, keeping cold air in and frost out....
$57.49
In Stock
Questions And Answers for 71053
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 71053
[Viewing 10 of 10]Door won’t open or close
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace leaking water inlet valve assembly
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Parts Used:
-
Richard from JACKSONVILLE, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
40 of 70 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The factory door gasket was split and needed replacing
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
Parts Used:
-
Carl from LAKE WYLIE, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
22 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Parts Used:
-
Tiziana from WARWICK, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
25 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!