71023 LG Refrigerator - Overview

Diagrams for 71023

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic Tube - 5/16 Inch – Part Number: MJU62070602
$32.95
In Stock
Primary Water Valve - Single Coil – Part Number: MJX41178908
$65.95
In Stock
Primary Water Valve - Single Coil
★★★★★
★★★★★
(4)
Part #MJX41178908
This single-coil water inlet valve is designed for use in refrigerators and controls the flow of water to both the ice maker and water dispenser. It plays a critical role in maintaining consistent water delivery ensuring proper ice production and dispenser functionality. The valve helps regulate pressure and timing optimizing system performance and preventing issues such as slow ice output weak water flow or interruptions in dispensing. Common symptoms of a failing valve include no water dispensing ice maker failure or leaks near the dispenser area. Installation requires disconnecting the appliance from power and water supply and verifying compatibility with your specific model before replacement.
Evaporator Fan Motor – Part Number: 4681JB1027C
$216.10
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(1)
Part #4681JB1027C
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is suggested to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.
Temperature Sensor – Part Number: 6615JB2005H
$54.95
In Stock
Temperature Sensor
★★★★★
★★★★★
(1)
Part #6615JB2005H
Keep your refrigerator running efficiently with this defrost sensor and thermistor assembly. It monitors the evaporator coil temperature to help regulate the defrost cycle, preventing frost buildup and maintaining proper airflow. If your fridge is struggling to stay cool or showing signs of frost overload, this part may need replacing. It comes with a fuse and wire harness for a complete and straightforward installation.
Defrost Sensor Assembly – Part Number: 6615JB2005N
$57.15
In Stock
Refrigerator Push Button Switch – Part Number: 6600JB3007K
$47.07
Special Order
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Light Bulb
Part #6912JB2004M
Slide Rail - Left Side – Part Number: 5218JA1010F
$138.12
In Stock
Slide Rail - Left Side
Part #5218JA1010F
Defrost Sensor Assembly – Part Number: 6500JB2001B
$36.25
In Stock
Defrost Sensor Assembly
Part #6500JB2001B
Drawer Guide – Part Number: 4974JJ1031A
$59.35
Special Order
Drawer Guide
Part #4974JJ1031A
Fan Assembly – Part Number: 5901JA1021A
$17.55
In Stock
Fan Assembly
Part #5901JA1021A
This fan assembly circulates air through the appliance to support proper temperature control and ventilation. Designed for quiet and efficient airflow, it is replaced when airflow weakens, noise increases, or cooling performance declines.

Exact Part matches for your search term

Vacuum beater bar belt – Part Number: 71023
No Longer Available
Vacuum beater bar belt
This part number matches the current model number 71023
Part #71023

Common Symptoms of the 71023

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replace Thermistor in back of freezer
18 of 25 people found this instruction helpful.
  • Scott from JUPITER, FL
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have cont inuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
Was this helpful?
Thank you for voting!
Very bad noise which stopped when the door was opened
15 of 20 people found this instruction helpful.
  • Rick from CLEVELAND, TN
  • Easy
  • 30 - 60 mins
  • Screw drivers
The Refrigerator now runs very quite.
After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful.
The back panel was a bit difficult but a hair dryer seemed to help .
All in all it was a good choice to do it myse lf as it was done quicker than waiting on a repair man.
Was this helpful?
Thank you for voting!
Water feed line running from water valve to filter housing was leaking
13 of 21 people found this instruction helpful.
  • Tom from EASTON, PA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
Was this helpful?
Thank you for voting!