6931 (Type 2) Porter Cable Router - Overview

This is a genuine replacement part sourced from the original manufacturer for use with routers. The special straight edge guide is used to guide the router along the material being cut. This straight edge guide is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part manufactured for use with Murray riding lawnmowers. The idler pulley is used to provide tension on the traction drive belt. This idler pulley is available as an individual replacement part, please see model diagram for associative parts.

This replacement collet is an authentic manufacturer-sourced component which is specially designed for use with Porter Cable and Black and Decker routers. Its purpose is to provide a tight grip for securing a router bit. It is a high-quality part which is made of durable metal and it is sold individually, please note the collet nut is sol...Read mored separately. Keep in mind that this collet is for using bits with 3/8" arbors only.

This is an Authentic Manufacturer Approved replacement part used on Routers. This part provides a firm grip for holding a bit in a tool. It is made out of Metal and is Sold Individually. This Collet is for using bits with 1/2" arbors only. Includes the 1/2" Collet and a Collet Nut. Due to prolonged, heavy use a Collet may need to be repl...Read moreaced eventually. To replace this Collet you would need to use a Wrench. • First you would need to remove the Collet Nut • Once the Nut is removed you can remove the old Collet • Place a new one in place • Tighten the Collet Nut back in place and your unit is ready to use 1/2" Bits

This is a Genuine Manufacturer Approved replacement part used on some Routers. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/4" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is included in this Assembly.

This is an authentic OEM sourced replacement part designed for use with routers. This part allows user to secure bits in a tool. This collet is for using bits with 1/4" arbors only. Due to prolonged, heavy use a collets tend to wear out requiring replacement. It is made from strong metal material and it is sold individually. Please note ...Read morethe collet nut is sold separately. To replace this 1/4" collet you will need a wrench. • First you would need to remove the collet nut • Remove the old collet • Secure the new one in place • Tighten the collet nut

This replacement sub base is an authentic manufacturer approved item. It is supplied directly from original equipment manufacturer for use with routers. This is the base plate that allows the tool to slide smoothly over the work surface. This part is made out of black plastic and it is sold individually. This is a simple repair that shou...Read moreld only require a screwdriver. • Remove the four (4) screws that secure the sub base • Remove the old plate and replace it with a new one • Secure the new plate using the four (4) screws

This is an authentic OEM sourced replacement 1/2 inch collet. It is specially designed for use with Black and Decker and Porter Cable routers. This part allows user to secure bits with 1/2 inch arbors only. It is made out of metal and is sold individually. Please note the collet nut is sold separately. To replace this item you will need a wrench.