68039 (AWBCSE0) LG Refrigerator - Overview
Sections of the 68039
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 2 of 2]
DISCONTINUED
This part number matches the current model number 68039
PartSelect #: PS2187925
Manufacturer #: Y0068039
No Longer Available
MANUAL 5.7MCI 8766-2
This part number matches the current model number 68039
PartSelect #: PS18925178
Manufacturer #: 68039
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Refrigerator Door Switch
PartSelect #: PS3529268
Manufacturer #: 6600JB1010A
This door switch is used in refrigerators. It is activated by the closing and opening of the door
$46.15
In Stock
Bushing
PartSelect #: PS3524960
Manufacturer #: 4984JJ3003A
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used t...
$13.15
In Stock
STOPPER, DOOR
PartSelect #: PS4705347
Manufacturer #: MJB63029901
This door stopper helps limit door movement to prevent overextension. Designed for durability and precise positioning, it supports controlled operation and long-term reliability.
$13.15
In Stock
Common Symptoms of the 68039
[Viewing 2 of 2]Light not working
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Remove and replace light switch
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Parts Used:
-
Debbie from Waltham, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
45 of 90 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old bushing worn and broken
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Parts Used:
-
Jerry from CORSICANA, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
23 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom door dropped slightly and bottom hinge area rubbing on steel door support
removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.
Parts Used:
-
Louis from PHILADELPHIA, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
12 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!