This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$81.63
In Stock
Questions And Answers for 66514573N611
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Justin
July 16, 2021
I have a Kenmore dishwasher model number 665.14573n611.You push start button and select the wash cycle you want. You shut door and hit start button again and dishwasher starts filling with water. After it is done you hear all kind of clicking under the dishwasher but it does not start washing or arms do not start moving inside the dishwasher. Then a short period of time passes and it drains itself and then fills itself again and it does that while the wash cycle timer is counting down, but does not start up washing in dishwasher. I was thinking that I might have a bad motor pump. I was wondering if your might have any ideas on what my problem could possibly be. Thanks so very much for your time.
For model number 66514573N611
Hello Justin, Thank you for the question. You may need to do a Hard Reset to reset the cycle timer. unplug the dishwasher, then wait at least 30 seconds before plugging it back into the outlet. The hard rest should force the circuit board to shut down long enough to make all sequences work correctly once the dishwasher is plugged in again. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
May 16, 2023
how do you take out the drain cover.
For model number 66514573N611
Hello Mark, thank you for contacting us. On the inside of the dishwasher, there is a drain filter instead of a cover. The attached video can show you how to remove the drain filter. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Joseph
November 29, 2023
I need a part number. Part hooks upper rack to the wheel glide. The part is on the rack. Where it goes into wheel broken off.
For model number 66514573N611
Hi Joseph,
Thank you for your question. The part you are referring to is the rack adjuster. The rack adjusters listed for your dishwasher have been redesigned by Whirlpool, so they are now made of metal instead of plastic. They are sold in a kit that includes both the left and right sides. The part number for the rack adjuster kit is PS10065979. We hope this helps!
The base of the front left side top rack roller broke and the rack is hanging down.I saw the parts diagram.What do i have to buy?
For model number 66514573N611
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Dishwasher Rack Adjuster Kit - Part Number PS10065979.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
1. Open the dishwasher and remove the two plastic grommets about halfway down on either side of the opening. Then remove the two screws under the grommets.
2. Remove the kick plate under the door. May have to lower unit by turning the feet using the adjustable wrench.
3. Make sure you have enough slack in the water input line and electrical wiring that you can pull the dishwasher out about 12 inches or more.
4. There is a spring and nylon rope link on both sides of the unit. Probably just one link is broken, but the replacement comes with two, so you can replace both or save one as a spare. Look at the good side and it should be pretty self explanatory how it attaches. I found it easiest to first thread the link around the lower pulley, then attach the link to the spring, then spring to the rear support, then the link to the door.