This is a basket for washing flatware or silverware in your dishwasher. This part has been updated and may differ in appearance but will function the same as the original.
$81.34
In Stock
Order within the next 11 hrs and your part ships today!
This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in a...
$46.84
In Stock
Order within the next 11 hrs and your part ships today!
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
$13.62
In Stock
Order within the next 11 hrs and your part ships today!
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
$10.33
In Stock
Order within the next 11 hrs and your part ships today!
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
$48.77
In Stock
Order within the next 11 hrs and your part ships today!
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
$14.20
In Stock
Order within the next 11 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for 66513943K010
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ian
February 16, 2020
Dishwasher serial number f04607298. The bottom rack of my dishwasher has seen better days. The rollers have broken and the tines of the rack are bent or broken or the plastic laminate is peeling off. Please provide availability and pricing for the following. Complete dishwasher bottom rack. This is to include the rollers and fittings to completely renew this part of the dishwasher. Also looking for a new silverware basket that goes along the side.
For model number 66513943K010
Hello Ian, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11755976 for the Lower Dishrack. The Rollers are PartSelect Number PS11750057 and are sold individually. The Detachable Tine Row is PartSelect Number PS11748197 and the Tine Retainer is PartSelect Number PS11748281. The Silverware Basket is PartSelect Number PS11722963. Please enter the part numbers into the search box on the site or see the related parts listed int he answer on the site for the current price and availability. We hope this helps.
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks.