This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.
$111.82
In Stock
Questions And Answers for 66513293K115
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
February 21, 2024
The upper slider has broken stops on the front - no part number - is part #4 good for the front of the rails (part 3)
For model number 66513293K115
Hello Dennis, thank you for your inquiry. The rack stop clips at the location 4 of the schematics are for the back of the drawer track. The rack stop clips for the front do not come separately. They come along with the drawer track, part number PS11750072. Customer service is available 7 days a week if you need help placing an order!
This dishwasher is working sporadically. I have replaced the main board and it worked for a couple of weeks and now it's back to doing it again. It seems to be getting hot enough? Sometimes i can change the cycle and it will work. Other times, not so much.
For model number 66513293K115
Hello Lin, thank you for contacting us. We would suggest inspecting the door latch. If the door is not latching properly, the dishwasher will not start, or could start and stop. Part number PS8770043. We hope this helps.
My dishwasher leaks from underneath during the drain cycle
For model number 66513293K115
Hi John, thank you for the question. If you find that your dishwasher is leaking from the bottom, you could also have a cracked hose or faulty valves connection issue. We would recommend checking the drain hose first. If it is fine, then you may need to replace the drain pump, part number PS11753379. Glad to be of help!
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks.
