The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This part is located on the top dish rack with two per side. It is sold individually. This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part i...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
This rinse aid dispenser cap is a precision-molded component designed to seal the rinse aid compartment within compatible dishwashers. Constructed from durable, blue-colored plastic and equipped with ...
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Als...
This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to repl...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Questions And Answers for 66513213K901
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
November 26, 2023
Does this have a filter and where?
For model number 66513213K901
Hello Frank, thank you for your question. The Filter is located just under the lower spray arm. This Accumulator and Filter PS897295 has an installation video on our site for you. Good luck with your repair.
When running with Sani-Wash, frequently will not complete the cycle. If it does, the Sanitized light is flashing and the clean button is yellow, not green. Without Sani-Wash turned on, still does not complete the cycle at times, and if it does, the clean light is yellow, not green.
For model number 66513213K901
Hi Tom,
Thank you for your question. If your dishwasher stops mid-cycle, we would recommend checking the door latch and switches, the electronic control board, the control panel, the heating element, and the vent assembly. We hope this helps!
Hi our dishwasher has stopped washing very well, it leaves lots of soap residue on all our plastics and pots and pans. It seems ok with stainless bowls and glassware. Maybe not rinsing. We recently changed the element. No soap left in the dispenser.
Any idea.
Thank you
For model number 66513213K901
Hi Carmen,
Thank you for your question. If you are not using rinse aid, soap residue may remain on your plastic containers and pots and pans. If rinse aid is not released into the dishwasher, then you will need to replace the rinse aid cap, part number PS11746426. We hope this helps!
Water does not seem to be coming into the machine so not washing properly. I have checked the stop on the input and that is open. Float is clean and grease free. What's next?
For model number 66513213K901
Hi Jacqui, thank you for reaching out. The issue seems to be with the water inlet valve, and you may need to replace it to fix the issue. The part number is PS8760080. We hope this solves your problem!
What would you recommend replacing when the upper spray arm does not spin when the cycle is running?
For model number 66513213K901
Hello Mark, thank you for writing. Typically when an arm will not spin, it is due to it being defective or that he small holes that the water spray out of are clogged or blocked. You can clean it by rinsing the spray arms with warm water, use a toothpick to clear the holes of any build-up. The middle are is part PS11746193. The top spinner is PS972316. and the Lower Spray Arm PS11745435. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was removed, the new part was slid into place and clipped onto the rack. The install was complete.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
