Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Buster
September 15, 2022
Are there filters on this dishwasher that I should be cleaning. My dishes still have debris on them after a regular wash cycle.
For model number 66512783K311
Hello Buster, thank you for your question. Yes, there is a filter on the bottom right next to the lower spray arm. We would also recommend checking spray arms and water valves for blockage and debris as they can also affect the quality of the wash. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Diane
December 7, 2022
One of the bottom rack rollers broke - the pin that holds the roller on
is lost. Can I replace it?
For model number 66512783K311
Hello Diane, thank you for your inquiry. The pin is only included with the lower dishrack roller, part number PS11750057. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Our dishwasher doesn't stop when it completes a wash cycle. It keeps repeating cycles. When it finally does stop, there is no "complete" indication like there used to be. Is there an electrical reset I can perform? Is there an electrical component I can replace? Thanks.
For model number 66512783K311
Hello Jon, thank you for contacting us. We would recommend performing a hard reset on the dishwasher by unplugging it for 10 minutes and then turning it back on. If this does not help, the issue is probably related to the electronic control board, part number PS11759622. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Good Morning....Kenmore Dishwasher. detergent doon won't stay closed. Can't find part number or diagram. Thanks Don
For model number 66512783K311
Hi Donald, thank you for reaching out. According to our research, you need to replace the entire detergent dispenser, part number PS11752439, to fix the issue. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Hi Gregory, thank you for the question. We have researched your model and found the Lower Dishrack you are looking for, the part number is PS10057160. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
My wife hired a local repairman when the right side spring cable broke (I was out of town). He took two hours to fix it (and two appointments). The door would then pop open when running. He came back and replaced the latch. Problems persisted. I then ordered new hinges and replaced both in half hour or so. Would recommend doing all of these repairs yourself. None of these repairs are that hard and definitely not worth paying hundreds to do it. Trickiest part is pulling the dishwasher out from the counter without impacting the electrical or water connections. Disconnecting the power is important on all repairs. When you take the screws out of the door to get to the hinges, make sure you have a helper just to hold the door up while removing the last few screws. The left side hinge was really bent (when the right side spring cable broke) - caused the door to be out of square and thus would not effectively close. This was obvious after a 5 minute search on this this and other repair sites. Process that I used: 1. remove screws from both sides holding dishwasher into counter (may have screws into countertop as well). 2. turn off power, 3. pull out dishwasher far enough to see hinges and springs (careful of connections), 4. remove front door screws, 5. take off front panel, 6. remove spring cables (pull cable taut and remove "hook" from hinge)., 7. unscrew two screws holding hinge to door, 8. bend metal fingers around hinge pin to be able to remove hinge., 9. attach hinge in opposite path. 10. repeat on other side (if necessary), 11. reconnect things in opposite order...test door prior to reattaching door panel. Make sure you level the unit with the adjustable feet. Make sure screws in sides of cabinet aren't too tight as it can take the unit out of square pretty easily...