63999 (ABKESEA) LG Wall Oven - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Time Delay Fuse – Part Number: 3B74133Q
$13.15
In Stock
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
Spring – Part Number: 4970WRA001B
$13.15
In Stock
Spring
Part #4970WRA001B
Motor Synchronous – Part Number: 6549W1S011B
$46.15
On Order
Motor Synchronous
Part #6549W1S011B
High Voltage Diode – Part Number: 6021W3B001V
$21.95
In Stock
High Voltage Diode
Part #6021W3B001V
Screw,Taptite – Part Number: 1SBF0402418
$13.15
Special Order
Screw,Taptite
Part #1SBF0402418
Thermostat – Part Number: 6930W1A003A
$17.55
Special Order
Thermostat
Part #6930W1A003A
Screw,Customized – Part Number: 4B70188C
$13.15
In Stock
Screw,Customized
Part #4B70188C
POWER CORD ASSEMBLY – Part Number: 6411W1A031A
No Longer Available
POWER CORD ASSEMBLY
Part #6411W1A031A
Lamp,Incandescent – Part Number: 6912W3B002G
$39.95
Special Order
Lamp,Incandescent
Part #6912W3B002G
PACKING,GASKET – Part Number: 3920W1A011A
No Longer Available
PACKING,GASKET
Part #3920W1A011A
Glass Cooking Tray – Part Number: 3390W1A012G
No Longer Available
Glass Cooking Tray
Part #3390W1A012G

Exact Part matches for your search term

DISCONTINUED – Part Number: 285515
No Longer Available
DISCONTINUED
This part number matches the current model number 63999
Part #285515
PICTURE CARTON 707 NESPRESSO 6 – Part Number: 63999
No Longer Available
PICTURE CARTON 707 NESPRESSO 6
This part number matches the current model number 63999
Part #63999

Common Symptoms of the 63999

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Burned Out On Turntable
37 of 49 people found this instruction helpful.
  • Steven from Oak Forest, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri p to home depot today.
Was this helpful?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Was this helpful?
Thank you for voting!
Door sensor switch went bad. Microwave would not operate.
15 of 29 people found this instruction helpful.
  • Randall from ARCADIA, CA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Watched a couple of repair videos on Youtube by searching for the model number. Found out what to do in order not to get shocked by the powerful capacitor.
Ordered the two switches (To be sure, I could have ordered a third switch as suggested in the videos.)
Bought a tamper-proof star bit to get the cover off. Followed the dir ections to replace the switches. - I broke the harness and had to use some super glue, but it's all good. I should have removed the harness instead of trying to get a switch out while it was still in place.
It's all back together, and the wife is happy!!
Was this helpful?
Thank you for voting!