63992 (AW1ESEA) LG Wall Oven - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Time Delay Fuse – Part Number: 3B74133Q
$13.15
In Stock
Magnetron – Part Number: 6324W1A001L
$120.07
In Stock
Magnetron
Part #6324W1A001L
Spring – Part Number: 4970WRA001B
$13.15
In Stock
Spring
Part #4970WRA001B
Motor Synchronous – Part Number: 6549W1S011B
$46.15
On Order
Motor Synchronous
Part #6549W1S011B
High Voltage Diode – Part Number: 6021W3B001V
$21.95
In Stock
High Voltage Diode
Part #6021W3B001V
Screw,Taptite – Part Number: 1SBF0402418
$13.15
Special Order
Screw,Taptite
Part #1SBF0402418
Thermostat – Part Number: 6930W1A003A
$17.55
Special Order
Thermostat
Part #6930W1A003A
Screw,Customized – Part Number: 4B70188C
$13.15
In Stock
Screw,Customized
Part #4B70188C
Lamp,Incandescent – Part Number: 6912W3B002L
$27.95
In Stock
Lamp,Incandescent
Part #6912W3B002L
POWER CORD ASSEMBLY – Part Number: 6411W1A031A
No Longer Available
POWER CORD ASSEMBLY
Part #6411W1A031A
PACKING,GASKET – Part Number: 3920W1A011A
No Longer Available
PACKING,GASKET
Part #3920W1A011A
Glass Cooking Tray – Part Number: 3390W1A012G
No Longer Available
Glass Cooking Tray
Part #3390W1A012G

Exact Part matches for your search term

Top (Platinum) – Part Number: 63992
No Longer Available
Top (Platinum)
This part number matches the current model number 63992
Part #63992

Common Symptoms of the 63992

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Burned Out On Turntable
37 of 49 people found this instruction helpful.
  • Steven from Oak Forest, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri p to home depot today.
Was this helpful?
Thank you for voting!
Magnitron failed
8 of 13 people found this instruction helpful.
  • Joseph from WILTON, NH
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
Over the stove microwave installed in top cabinet row.
1. Unplug device.
2. Two people to remove from wall/cabinet (remove two, large, top mounting screws and rotate entire microwave down and off the wall mount). Should be some wood spacers between top of device and bottom of cabinet.
3. Remove screws from sheet metal cover .
4. Remove one screw holding blowers in place and rotate out of the way, in order to gain access to 2 of 5 screws that hold the magnetron in place.
5. Unplug magnetron and remove the 5 screws.
6. Drop in new magnetron and re-assemble microwave in reverse order (steps 5-3).
7. Two people restore micro to wall/cabinet. Replace wood spacers, re-install two, large mounting screws (finger-tight). Test device. Secure the two large screws.
Was this helpful?
Thank you for voting!
Arcing had caused burned turntable and melted connection to sec. motor.
5 of 6 people found this instruction helpful.
  • John from MOUNTAIN VIEW, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchrono us motor. Removed two screws holding motor and electrical plug. Swapped new motor in its place. Re-attached bottom plate with its screws. Placed microwave onto it normal position. Re-attached top cover with its secure screws. Installed new turntable inside.
Was this helpful?
Thank you for voting!