592-29222 (0004) Samsung Washer - Overview

Diagrams for 592-29222

See every part. Know exactly what you need.

Parts for the 592-29222

$86.14

Damper Assembly

Part #DC97-05280W

$5.95

Tapping Screw

Part #6002-000520

This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.

$46.09

Water Temperature Thermistor

Part #DC90-10128N

The thermistor monitors and helps regulator the water temperature in the washer.

$154.98

Water Inlet Valve Assembly

★★★★★

(1)

Part #DC97-15459G

$119.76

Washer Drain Pump Assembly

★★★★★

(1)

Part #DC97-19289F

During each drain cycle, the pump must move water out quickly so the washer can continue to spin. Humming, grinding, slow drainage, or repeated stopping may indicate a damaged motor or impeller. Inspect and clear the filter and hoses before ordering a replacement. Match the pump to the full appliance model and parts diagram. Disconnect el...Read more

Read less

$66.73

Hexagon Nut

Part #6021-001573

$5.95

Tapping Screw

Part #6002-000213

$136.71

Drain Hose Assembly

Part #DC97-18682D

The drain hose carries used water from the washer to your house drain.

$11.78

Pulsator Bolt

Part #DC60-40133A

$86.83

Water Level Pressure Switch

★★★★★

(1)

Part #DC96-01703C

$125.34

Drain Hose Assembly

Part #DC97-17417A

This drain hose (part number DC97-17417A) is for washers. Drain hose DC97-17417A carries used water from the washer to your house drain. Shut off the water supply and unplug the washer before installing this part. Wear work gloves to protect your hands.

$14.57

Leg Adjuster

Part #DC61-01722B

This leveling leg (part number DC61-01722B) is for washers. Leveling leg DC61-01722B supports the washing machine. Adjust the height of the leveling leg to make the washer level. Unplug the washer before installing this part. Wear work gloves to protect your hands.

Common Symptoms of the 592-29222

How this model fails, and the parts that fix it.

Not cleaning dishes properly

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Washer stopping in the rinse and spin cycle

6 of 10 people found this instruction helpful.

Gary from CENTER HARBOR, NH
Easy
15 - 30 mins
Screw drivers, Socket set

Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.

Was this helpful?

Top Load washer would not drain to complete spin cycle.

10 of 24 people found this instruction helpful.

Greg from Medina, OH
Very Easy
15 - 30 mins
Pliers, Screw drivers

Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, ... Read more

Read less

Was this helpful?

Washer will not drain

6 of 12 people found this instruction helpful.

Alpha from JACKSONVILLE, FL
A Bit Difficult
1- 2 hours
Pliers, Screw drivers

Went to YouTube video and followed instructions.

Hardest part was making sure water from hose does not flood floor while taking it off from water pump and letting water drain in bucket.

See YouTube video

https://youtu.be/oOnxbj-unfc?si=OFFwOcNiIymh_9b-

Was this helpful?