592-29212 (0001) Samsung Washer - Overview

This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.

The thermistor monitors and helps regulator the water temperature in the washer.

During each drain cycle, the pump must move water out quickly so the washer can continue to spin. Humming, grinding, slow drainage, or repeated stopping may indicate a damaged motor or impeller. Inspect and clear the filter and hoses before ordering a replacement. Match the pump to the full appliance model and parts diagram. Disconnect el...Read moreectrical power and water, prepare towels for spills, and avoid running the pump dry. After reassembly, perform a short test while watching every hose connection for leaks.

The control knob lets you control cycle settings.

This drain hose (part number DC97-17417A) is for washers. Drain hose DC97-17417A carries used water from the washer to your house drain. Shut off the water supply and unplug the washer before installing this part. Wear work gloves to protect your hands.

Washer drain pump DC31-00054D is an original equipment manufacturer (OEM) part that fits some Samsung front-load and top-load washers. The drain pump is used to remove any water from the washer after it has completed its washing cycle. If your washer still has water left in the tub after it has finished washing, this drain pump assembly is likely bad, defective, or worn out, and in need of replacing immediately.