580752620 Craftsman Pressure Washer - Overview

Diagrams for 580752620

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit-retainer Clips – Part Number: 195964GS
$8.95
Special Order
Kit-retainer Clips
Part #195964GS
This authentic manufacturer-supplied part is specially designed for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. It is a special hardware that helps to secure components. This is an identical replacement for a missing or a damaged retainer clip that was installed on a new unit. Note, it is made of durable plastic and is sold in a pack of four. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the proper replacement procedure.
Nozzle, Soap – Part Number: 198841GS
$20.95
Special Order
Nozzle, Soap
Part #198841GS
This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.
Guide-Rope – Part Number: 205912GS
$8.95
Special Order
Guide-Rope
Part #205912GS
Screw, 3/8 - 16 X 1-1/4 Taptit – Part Number: 75246GS
$7.95
Special Order
Garden Hose Filter – Part Number: B2384GS
$8.95
Special Order
Garden Hose Filter
Part #B2384GS
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.
Kit, Handle Fastening – Part Number: B2203GS
$9.95
Special Order
Kit, Handle Fastening
Part #B2203GS
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.
Kit, Nozzle – Part Number: 202514GS
$39.95
Special Order
Kit, Nozzle
Part #202514GS
This is available as a set that contains four different nozzles. They are authentic OEM sourced items which are specifically produced for use with pressure washers made by Briggs & Stratton and Snapper. A set of pliers might be needed during the installation process. They are made of metal and plastic and will need to be replaced if they break.
Water Outlet Kit – Part Number: 206375GS
$211.95
Special Order
Water Outlet Kit
Part #206375GS
Pump – Part Number: 206376GS
$674.95
Special Order
Pump
Part #206376GS
This is an authentic Craftsman replacement part. The pump assembly is commonly found in pressure washers. This is a complete assembly, including a relief valve, key, and attachment hose. This part is used to pump water from the water supply hose through the pressure washer.
Thermal Relief Valve – Part Number: 208673GS
$27.95
Special Order
Thermal Relief Valve
Part #208673GS
This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pump. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Engine Retaining Ring – Part Number: 703976
$7.95
Special Order
Engine Retaining Ring
Part #703976

Manuals & Care Guides for 580752620

Click to download

Common Symptoms of the 580752620

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Was this helpful?
Thank you for voting!