580752600 Craftsman Pressure Washer - Overview

Diagrams for 580752600

See every part. Know exactly what you need.

Parts for the 580752600

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, Inlet Check – Part Number: 190592GS
$37.95
Special Order
Kit, Inlet Check
Part #190592GS
Kit, Seal Set – Part Number: 190595GS
$182.95
Special Order
Kit, Seal Set
Part #190595GS
This is an authentic Briggs & Stratton replacement part manufactured for use with pressure washers. The seals are used with the brass head on the pump. This seal set kit is sold as an individual replacement part.
Cap – Part Number: 190581GS
$14.95
Special Order
Cap
Part #190581GS
Oil Bottle – Part Number: 190585GS
$39.07
Special Order
Oil Bottle
Part #190585GS
This manufacturer-approved oil is commonly used in pressure washers. It is made to lubricate the internal pump drive components. This plastic bottle contains 5.3 fluid ounces of oil. It is recommended to wear work gloves to protect your hands when replacing the pump oil. You may need to purchase this item if you run out of oil or your bottle is damaged.
Kit, Handle Fastening – Part Number: B2203GS
$9.95
Special Order
Kit, Handle Fastening
Part #B2203GS
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.
Read less
Pump – Part Number: 206376GS
$674.95
Special Order
Pump
Part #206376GS
This is an authentic Craftsman replacement part. The pump assembly is commonly found in pressure washers. This is a complete assembly, including a relief valve, key, and attachment hose. This part is used to pump water from the water supply hose through the pressure washer.
Thermal Relief Valve – Part Number: 208673GS
$27.95
Special Order
Thermal Relief Valve
Part #208673GS
This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pump. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.
Read less
Kit, Outlet,anodized – Part Number: 190589GS
$78.95
Special Order
Kit, Outlet,anodized
Part #190589GS
This is an original part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The outlet tube kit includes the O-ring. The pressure hose connects to the outlet tube, which threads onto the pump. The tool that you will need to replace the outlet tube kit is a Wrench Set.
Kit, Pipe Fitting – Part Number: 193971GS
$14.95
Special Order
Kit, Pipe Fitting
Part #193971GS
Wand Assembly – Part Number: 704312
$177.95
Special Order
Wand Assembly
Part #704312
This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Read less
Hose – Part Number: 84006753
$104.95
Special Order
Hose
Part #84006753
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
View More

Manuals & Care Guides for 580752600

Click to download
Manual
Owner's Manuals
(2.86MB)

Questions And Answers for 580752600

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve - For model number 580752600
March 4, 2022
Do you have the entire pump for sale? Thank you
Chris Boyle Profile
Hello Steve, thank you for your question. We have researched the model you have provided, and we would suggest the Pump Assembly part PS9919184. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
$674.95
Special Order
Pump
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 580752600

How this model fails, and the parts that fix it.

Leaks water
Fixed by
these parts
Fixing
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Read less
Was this helpful?
Thank you for voting!
check valve O ring was badly deteriorated - spraying water out at O ring
2 of 6 people found this instruction helpful.
  • bernard from INDIAN TRAIL, NC
  • Easy
  • 15 - 30 mins
  • Socket set
The description of the parts package on your website did not appear to be in proper (size) scale However, after following a Youtube video, I was then able to decipher what parts went where to be sure I was ordering the correct parts that I needed. Parts were shipped promptly and I found that replacing just the check valve o rings and sea ts, it cured the problem without having to use the other parts that came with the kit package. Would definitely order from this site again. BL NC
Read less
Was this helpful?
Thank you for voting!
View More