580752550 Craftsman Pressure Washer - Overview

Diagrams for 580752550

See every part. Know exactly what you need.

Parts for the 580752550

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, Breather Tube – Part Number: 190669GS
$83.95
Special Order
Kit, Breather Tube
Part #190669GS
The breather tube kit is sold as a set that contains all the necessary parts. They are made out of plastic and metal. When replacing these items a screwdriver may be needed. They may become broken and will need to be replaced. These are Briggs & Stratton and Troy-Bilt replacement parts directly sourced from the manufacturer for use in pressure washers.
Kit, Inlet Check – Part Number: 190592GS
$37.95
Special Order
Kit, Inlet Check
Part #190592GS
Kit, Seal Set – Part Number: 190595GS
$182.95
Special Order
Kit, Seal Set
Part #190595GS
This is an authentic Briggs & Stratton replacement part manufactured for use with pressure washers. The seals are used with the brass head on the pump. This seal set kit is sold as an individual replacement part.
Cap – Part Number: 190581GS
$14.95
Special Order
Cap
Part #190581GS
Oil Bottle – Part Number: 190585GS
$39.07
Special Order
Oil Bottle
Part #190585GS
This manufacturer-approved oil is commonly used in pressure washers. It is made to lubricate the internal pump drive components. This plastic bottle contains 5.3 fluid ounces of oil. It is recommended to wear work gloves to protect your hands when replacing the pump oil. You may need to purchase this item if you run out of oil or your bottle is damaged.
Kit, Handle Fastening – Part Number: B2203GS
$9.95
Special Order
Kit, Handle Fastening
Part #B2203GS
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.
Read less
Thermal Relief Valve – Part Number: 208673GS
$27.95
Special Order
Thermal Relief Valve
Part #208673GS
This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pump. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.
Read less
Kit, Pipe Fitting – Part Number: 193971GS
$14.95
Special Order
Kit, Pipe Fitting
Part #193971GS
Wand Assembly – Part Number: 704312
$177.95
Special Order
Wand Assembly
Part #704312
This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Read less
Hose – Part Number: 84006753
$104.95
Special Order
Hose
Part #84006753
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
Kit, Pump Mounting Hardware – Part Number: 192131GS
No Longer Available
Kit, Pump Mounting Hardware
Part #192131GS
This is a genuine Briggs & Stratton replacement part. The mounting hardware is commonly found on pressure washers. This kit includes four metal bolts and washers, and is used to secure the pump on the machine. You will require an Allen or hex wrench when replacing this item. This part is sold individually.
View More

Manuals & Care Guides for 580752550

Click to download
Manual
Owner's Manuals
(2.88MB)

Common Symptoms of the 580752550

How this model fails, and the parts that fix it.

Leaks water
Fixed by
these parts
Fixing
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Read less
Was this helpful?
Thank you for voting!
check valve O ring was badly deteriorated - spraying water out at O ring
2 of 6 people found this instruction helpful.
  • bernard from INDIAN TRAIL, NC
  • Easy
  • 15 - 30 mins
  • Socket set
The description of the parts package on your website did not appear to be in proper (size) scale However, after following a Youtube video, I was then able to decipher what parts went where to be sure I was ordering the correct parts that I needed. Parts were shipped promptly and I found that replacing just the check valve o rings and sea ts, it cured the problem without having to use the other parts that came with the kit package. Would definitely order from this site again. BL NC
Read less
Was this helpful?
Thank you for voting!
View More