My Orders
580752540 Craftsman Pressure Washer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$55.95
Special Order
Kit, Engine Mounting Hardware
Part #192134GS
The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.
$20.95
Special Order
Nozzle, Soap
Part #198841GS
This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.
$124.95
Special Order
Kit, Water Inlet
Part #204085GS
$8.95
Special Order
Garden Hose Filter
Part #B2384GS
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.
$9.95
Special Order
Kit, Handle Fastening
Part #B2203GS
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for t...Read morehe correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.
Read less
$27.95
Special Order
Thermal Relief Valve
Part #208673GS
This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.
Read less
$7.95
Special Order
Clip, Tree
Part #B1797GS
$177.95
Special Order
Wand Assembly
Part #704312
This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wr...Read moreench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Read less
$89.95
Special Order
Wand-qc
Part #706595
This is an authentic OEM part for use with Craftsman Pressure Washers. The quick connector also is known as the wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reason for replacing the wand is if it is leaking or damaged. This part is sold individually. The tool that you will need to replace the wand is Silicone grease (optional).
No Longer Available
Kit, Pump Mounting Hardware
Part #192131GS
This is a genuine Briggs & Stratton replacement part. The mounting hardware is commonly found on pressure washers. This kit includes four metal bolts and washers, and is used to secure the pump on the machine. You will require an Allen or hex wrench when replacing this item. This part is sold individually.
No Longer Available
Axle
Part #191267SGS
Manuals & Care Guides for 580752540
Click to downloadCommon Symptoms of the 580752540
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More