580742800 Craftsman Pressure Washer - Overview

Diagrams for 580742800

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grommet – Part Number: 30809GS
$7.95
Special Order
Grommet
Part #30809GS
Screw, M8 1.25 X 15, Taptite – Part Number: 83512GS
$9.95
Special Order
Screw, M8 1.25 X 15, Taptite
Part #83512GS
This is an authentic manufacturer-sourced component from Briggs & Stratton. The taptite screw (m8 1.25 x 15) is made for use with various generators and pressure washer devices. This part is often used to secure the governor adjust bracket. The screw is sold individually. A wrench is needed for making the replacement.
Vibe Mount, With Washer – Part Number: 191413GS
$11.95
Special Order
Vibe Mount, With Washer
Part #191413GS
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the vibration of a working unit, unfortunately, over time it may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality vibe mount with a washer is sold individually.
Screen, Spark Arrest – Part Number: 83083GS
$17.95
Special Order
Screen, Spark Arrest
Part #83083GS
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with generator engines. The spark arrester screen connects to the muffler and is used to prevent embers from being discharged through the exhaust gasses. Over time the screen can become clogged from exhaust discharge and can inhibit the gasses from escaping. This item is available as an individual replacement part.
Grommet,tank – Part Number: 83465GS
$6.95
Special Order
Grommet,tank
Part #83465GS
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The most common reasons for replacing the grommet is if the fuel is leaking from the fuel tank, the fuel lines are loose at the tank or the rubber grommet is cracked and not sealing. This part is made out of rubber and is sold individually. Here is a list of tools that are needed to replace the grommet a receptacle for draining fuel, a wire hook (to retrieve fuel lines), screwdriver, wire cutters or scissors.
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Hose – Part Number: 84006753
$104.95
Special Order
Hose
Part #84006753
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
Nozzle, Qc,white – Part Number: 195983DGS
No Longer Available
Nozzle, Qc,white
Part #195983DGS
This is a genuine OEM replacement part made to fit the pressure washers listed below. It is a quick connect style white nozzle with a fairly low-pressure forty (40) degree spray. It is used for moderate washing duties and is safe for most surfaces. Sold individually.
Hose – Part Number: 205734GS
No Longer Available
Hose
Part #205734GS
O-Ring – Part Number: 11292294PGS
No Longer Available
O-Ring
Part #11292294PGS
Mount, Vibration – Part Number: 82857GS
No Longer Available
Mount, Vibration
Part #82857GS
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers. The rubber mount is used to absorb vibration between the engine and the machine's frame. This item is available as an individual replacement part.
Gasket, Exhaust – Part Number: 90239GS
No Longer Available
Gasket, Exhaust
Part #90239GS

Common Symptoms of the 580742800

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Carberator gummed up from sitting in storage. Fuel gone bad in the tank
6 of 7 people found this instruction helpful.
  • Robert from BATON ROUGE, LA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Socket set
With a 12-in-one nut screwdriver I removed the two bolts holding the breather cover and air filter. Then I used about a 9/16 deep socket ratchet to remove the nuts holding the breather housing to the carburetor assembly studs. A pair of needle nose pliers was used to disconnect the throttle then I wriggled the breather cover away from t he carburetor so I could get to the fuel line. I managed to pull the fuel line off the carburetor and from the shut-off valve at the tank. The carburetor slid freely and easily off the carburetor studs and I was careful not to damage the carburetor gasket since none came with the new carburetor. I used a single edge razor blade to free the gasket from the old carburetor. A very small amount of silicone lube was used on the gasket and then I sandwiched the old gasket between the carburetor intake and the new carburetor and attached the throttle connection. Before beginning the reassembly I unscrewed the shut-off valve from the tank and used a funnel to drain the very old fuel into a 5-gallon bucket. I made sure the valve was clean by spraying carburetor cleaner through it and did the same with the old fuel line, making sure everything was clear of any obstruction. Then replace the breather assembly back over the carburetor studs, snugged the nuts back on and then replaced the air filter and cover. I re-attached the fuel line to the fuel valve and the carburetor, added a half gallon of clean fresh fuel and was ready for a smoke check. Pulled the starter rope three times with the choke full on, then turned to half-choke and the puppy started right off. I then turned the choke completely off and the engined purred along. I then exercised the generator by plugging in and running a number of power tools for about 15 minutes. Followed standard shut off procedures and the generator is ready for use. Saving the old carburetor to be cleaned and held on reserve for the future. Might want to have another gasket handy or some gasket material should it have to be replaced in the future.
Was this helpful?
Thank you for voting!