580676642 Craftsman Pressure Washer - Overview

Diagrams for 580676642

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, High Pressure Seals – Part Number: 200280GS
$156.95
Special Order
Kit, High Pressure Seals
Part #200280GS
Kit, Pump Head, Alum – Part Number: 200282GS
$288.95
Special Order
Kit, Pump Head, Alum
Part #200282GS
This is an OEM part sourced directly from the manufacturer. The pump head kit is designed for use in pressure washers from Briggs & Stratton and Troy-Bilt. This part is made of metal, and comes with four bolts for attachment. It is used to direct the flow of water through the machine. You may require a wrench or Allen key when replacing this part.
Kit, Chemical Injection – Part Number: 200279GS
$42.95
Special Order
Kit, Chemical Injection
Part #200279GS
This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made out of metal. If these items in the chemical injection kit become broken they will need to be replaced and may require a socket set during the installation.
Kit, Vibration Mount – Part Number: 198766GS
$24.95
Special Order
Kit, Vibration Mount
Part #198766GS
Oil Bottle – Part Number: 190586GS
$28.76
Special Order
Oil Bottle
Part #190586GS
This bottle of oil is OEM and approved by the manufacturer. It is compatible with dozens of models of pressure washers. This one 4.6 oz bottle is the adequate amount of oil needed for the machine. A socket set is required to remove the plug on the oil pump. It is recommended to use a small funnel to pour the oil into the pump to prevent spillage.
Garden Hose Filter – Part Number: B2384GS
$8.95
Special Order
Garden Hose Filter
Part #B2384GS
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.
Wand, Hi-lo – Part Number: 205015CGS
$126.95
Special Order
Wand, Hi-lo
Part #205015CGS
This is an authentic OEM part for use with Craftsman Pressure Washers. The wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reasons for replacing the spray wand are when it is worn-out or is leaking. This part is sold individually. The tool that you will need to replace the wand is a 5/8 inch wrench. Shut the pressure washer off before installing the wand.
Thermal Relief Valve – Part Number: 208673GS
$27.95
Special Order
Thermal Relief Valve
Part #208673GS
This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pump. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Hose – Part Number: 84006753
$104.95
Special Order
Hose
Part #84006753
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
Assy, Pump – Part Number: 206383GS
No Longer Available
Assy, Pump
Part #206383GS
Part 706385 Front Facing Pump and 706384 Rear Facing Pump Kits are the replacement for this pump.
Kit, Check Valves – Part Number: 200298GS
No Longer Available
Kit, Check Valves
Part #200298GS

Manuals & Care Guides for 580676642

Click to download

Common Symptoms of the 580676642

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Was this helpful?
Thank you for voting!