580676640 (020248-0) Craftsman Pressure Washer - Overview

Diagrams for 580676640

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, Inlet Check – Part Number: 190592GS
$37.95
Special Order
Kit, Inlet Check
Part #190592GS
Cap – Part Number: 190581GS
$14.95
Special Order
Cap
Part #190581GS
Oil Bottle – Part Number: 190586GS
$28.76
Special Order
Oil Bottle
Part #190586GS
This bottle of oil is OEM and approved by the manufacturer. It is compatible with dozens of models of pressure washers. This one 4.6 oz bottle is the adequate amount of oil needed for the machine. A socket set is required to remove the plug on the oil pump. It is recommended to use a small funnel to pour the oil into the pump to prevent spillage.
Manifold Housing – Part Number: 190627GS
No Longer Available
Manifold Housing
Part #190627GS
It is a genuine OEM sourced item that is designed for Briggs and Stratton, Snapper and Troy-Built pressure washers. The manifold housing is an important component that attaches to the pump head. It houses the unloader valve, the check valves, the outlet tube and the chemical injection assembly. If the manifold housing is worn or damaged it can cause water leaks and it should be replaced to ensure the equipment is functioning properly. To determine the exact location and the correct installation of this manifold housing, refer to the appropriate diagrams of your model. You will need a screwdriver and a wrench set to perform this repair. This high-quality manifold housing is made of durable metal and is sold as an individual component.
Orifice – Part Number: 21760GS
No Longer Available
Orifice
Part #21760GS
Kit,check Valves – Part Number: 190591GS
No Longer Available
Kit,check Valves
Part #190591GS
It is an authentic manufacturer-supplied check valves kit which is designed for use with Briggs and Stratton, Snapper and Troy-Bilt pressure washers. The check valves are important components that attach to the pump head to help maintain safe working water pressure in the pump. Unfortunately, over time they may wear out or get damaged eventually requiring replacements. It is a high-quality kit which includes six check valve, the O-rings, and the hardware to secure them. Make sure to refer to the appropriate diagrams and the owner's manual for your model to ensure the correct replacement procedure. An Allen wrench set will be needed to take apart and reassemble the pump housing when replacing these components.
Valve, Seat, Plastic – Part Number: 190630GS
No Longer Available
Valve, Seat, Plastic
Part #190630GS
This is an original replacement part sourced directly from the manufacturer. The valve seat is commonly found in pressure washers from Briggs & Stratton and Troy-Bilt. This part is made of high-quality plastic, and is used as a seat for the unloader valve. You may require a wrench when replacing this item. The valve seat is sold as an individual replacement part.
Kit, Pump/engine Mounting Hard – Part Number: 192525GS
No Longer Available
Kit – Part Number: 196895GS
No Longer Available
Kit
Part #196895GS
Hose – Part Number: 189971GS
No Longer Available
Hose
Part #189971GS
Oil Cap – Part Number: 190571GS
No Longer Available
Oil Cap
Part #190571GS
Chemical Injection Kit – Part Number: 190593GS
No Longer Available
Chemical Injection Kit
Part #190593GS
This is a genuine Craftsman replacement part that is intended to be used with pressure washers. The chemical injection kit attaches to the pump assembly. This item is used to link the chemical hose with the pump when using a soap mixture to clean. This kit includes the connector, ball, and spring.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Was this helpful?
Thank you for voting!
check valve O ring was badly deteriorated - spraying water out at O ring
2 of 6 people found this instruction helpful.
  • bernard from INDIAN TRAIL, NC
  • Easy
  • 15 - 30 mins
  • Socket set
The description of the parts package on your website did not appear to be in proper (size) scale However, after following a Youtube video, I was then able to decipher what parts went where to be sure I was ordering the correct parts that I needed. Parts were shipped promptly and I found that replacing just the check valve o rings and sea ts, it cured the problem without having to use the other parts that came with the kit package. Would definitely order from this site again. BL NC
Was this helpful?
Thank you for voting!