580646621 (020322-1) Craftsman Pressure Washer - Overview

Diagrams for 580646621

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, Chemical Injection – Part Number: 200279GS
$42.95
Special Order
Kit, Chemical Injection
Part #200279GS
This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made out of metal. If these items in the chemical injection kit become broken they will need to be replaced and may require a socket set during the installation.
Kit, Vibration Mount – Part Number: 198766GS
$24.95
Special Order
Kit, Vibration Mount
Part #198766GS
Garden Hose Filter – Part Number: B2384GS
$8.95
Special Order
Garden Hose Filter
Part #B2384GS
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.
Kit, Handle Fastening – Part Number: B2203GS
$9.95
Special Order
Kit, Handle Fastening
Part #B2203GS
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.
KIT, Wheel – Part Number: 201388GS
No Longer Available
KIT, Wheel
Part #201388GS
Assy, Pump – Part Number: 206383GS
No Longer Available
Assy, Pump
Part #206383GS
Part 706385 Front Facing Pump and 706384 Rear Facing Pump Kits are the replacement for this pump.
Orifice – Part Number: B1236DGS
No Longer Available
Orifice
Part #B1236DGS
Kit, Pump/engine Mounting Hard – Part Number: 192525GS
No Longer Available
Hose – Part Number: 189971GS
No Longer Available
Hose
Part #189971GS
O-Ring Maintenance Kit And Nozzle Cleaner – Part Number: 191922GS
No Longer Available
Kit – Part Number: 200278GS
No Longer Available
Kit
Part #200278GS
Manual, Operator�s – Part Number: 206230GS
No Longer Available
Manual, Operator�s
Part #206230GS
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Supplied hose has "press on" fitting on one end, washer does not accommodate it
2 of 6 people found this instruction helpful.
  • Anthony from RIDGEFIELD, CT
  • Very Easy
  • Less than 15 mins
One can either pull off the plastic fitting on one end (the one with an o-ring) and press the plastic tubing onto the pressure washer detergent inlet (located just behind the high pressure hose outlet/connector). The other end of the device is then inserted into a jug of pressure washer detergent and the lowest pressure nozzle or nozzle setting selected to allow detergent to be drawn up into the washwater stream with the pressure washer running. One can observe the detergent flowing into the washer if all is good! If one cannot pull off the plastic fitting on one end (the other fitting, to be left!, has a "screen" on its end - the fitting can be cut off the plastic tubing with a utility knife.
Was this helpful?
Thank you for voting!