5648888520 Kenmore Microwave - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stack Kit – Part Number: W10869845
$51.65
In Stock
Stack Kit
★★★★★
★★★★★
(2)
Part #W10869845
This stacking kit allows compatible front-load washer and dryer models to be stacked vertically. It is designed to maximize laundry space and can be used on various models. Please use your model number to verify compatibility before purchasing.
Affresh Dishwasher Cleaner Tablets - 6 – Part Number: W10549851
$29.95
In Stock
Affresh Dishwasher Cleaner Tablets - 6
Part #W10549851
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine while your detergent cleans your dishes.
Washer Hose Clamp – Part Number: WP356138
$15.07
In Stock
Washer Hose Clamp
Part #WP356138
This clamp helps to prevent leaking by holding the end of water hose in place.
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
Rack holder – Part Number: 12246
No Longer Available
Rack holder
Part #12246
Collar – Part Number: 10158
No Longer Available
Collar
Part #10158
Stopper – Part Number: 10523
No Longer Available
Stopper
Part #10523
Transistor – Part Number: 11125
No Longer Available
Transistor
Part #11125
NOT AVAILABLE – Part Number: N/P
No Longer Available
NOT AVAILABLE
Part #N/P
SPRING – Part Number: 10566
No Longer Available
SPRING
Part #10566
CONTROL KNOB – Part Number: Y10567
No Longer Available
CONTROL KNOB
Part #Y10567
DISCONTINUED – Part Number: 10561
No Longer Available
DISCONTINUED
Part #10561

Common Symptoms of the 5648888520

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Was this helpful?
Thank you for voting!
Door sensor switch went bad. Microwave would not operate.
15 of 29 people found this instruction helpful.
  • Randall from ARCADIA, CA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Watched a couple of repair videos on Youtube by searching for the model number. Found out what to do in order not to get shocked by the powerful capacitor.
Ordered the two switches (To be sure, I could have ordered a third switch as suggested in the videos.)
Bought a tamper-proof star bit to get the cover off. Followed the dir ections to replace the switches. - I broke the harness and had to use some super glue, but it's all good. I should have removed the harness instead of trying to get a switch out while it was still in place.
It's all back together, and the wife is happy!!
Was this helpful?
Thank you for voting!
everything worked except it wouldnt cook
11 of 21 people found this instruction helpful.
  • Joseph from N VERSAILLES, PA
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
tested all 3 of the door switche for continuity, the top switch was faulty, replaced it,for approx $4.00 and saved a $350 dollar microwave.
Was this helpful?
Thank you for voting!