56428702700 Kenmore Freezer - Overview
Sections of the 56428702700
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Lower Dishrack Kit
PartSelect #: PS2378335
Manufacturer #: W10311986
The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 22-inch x 21-inch. Th...
$281.60
In Stock
Dishrack
PartSelect #: PS12348079
Manufacturer #: W11169039
The gray upper dishrack kit replaces the original dishrack in select dishwashers. It does not come pre-assembled, so you may need to transfer rollers from your old rack if your model is non-adjustable...
$243.31
In Stock
Pump and Motor Assembly
PartSelect #: PS3500987
Manufacturer #: W10428023
This pump and motor assembly is intended for use with some dishwashers. It comes complete with a relay and a spray nozzle. The motor included here performs 3450 revolutions per minute and carries 120 ...
No Longer Available
Questions And Answers for 56428702700
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bottom rack was starting to rust away and we needed a new one
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
Parts Used:
-
pat from muncy, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rollers and clips on botton dishrack were broken
I pulled off the old clips and easily replaced them with the new clips and popped on the wheels.
I replaced 8 clips and 8 wheels in less than 15mins
I replaced 8 clips and 8 wheels in less than 15mins
Parts Used:
-
Diane from Waltham, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
20 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coating on the rack has worn exposing the metal underneath
There were no instructions with the part, but looking at the old rack it was simple to see how the parts should be assembled. Took the center part from the old rack, twisted off, and applied it to the center of the new rack. Snapped on the wheels and was done. Very simple assembly.
Parts Used:
-
Susan from Shelby Township, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
13 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!