Models > 56-5383-10-01

56-5383-10-01 Tappan Microwave - Overview

Sections of the 56-5383-10-01

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
White Touch up Paint – Part Number: 5303321319
White Touch up Paint
★★★★★
★★★★★
(1)
PartSelect #: PS467298
Manufacturer #: 5303321319
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
$17.68
  On Order
SCREW – Part Number: 5303300265
SCREW
PartSelect #: PS463003
Manufacturer #: 5303300265
$17.34
  Special Order
NUT – Part Number: 5303212803
NUT
PartSelect #: PS457503
Manufacturer #: 5303212803
Sold individually.
  No Longer Available
Carousel Tray Drive Bushing - 1/4" Shaft – Part Number: 5303303047
Carousel Tray Drive Bushing - 1/4" Shaft
PartSelect #: PS463722
Manufacturer #: 5303303047
This part helps turn the glass turntable tray in your microwave.
  No Longer Available
Interlock Switch – Part Number: 5303203636
Interlock Switch
PartSelect #: PS454567
Manufacturer #: 5303203636
This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.
  No Longer Available
Carousel Glass Cooking Tray – Part Number: 5308037674
Carousel Glass Cooking Tray
PartSelect #: PS474509
Manufacturer #: 5308037674
  No Longer Available
CORD-ELECTRIC POWER – Part Number: 317005403
CORD-ELECTRIC POWER
PartSelect #: PS440409
Manufacturer #: 317005403
  No Longer Available
MOTOR-TURNTABLE – Part Number: 317005505
MOTOR-TURNTABLE
PartSelect #: PS440414
Manufacturer #: 317005505
  No Longer Available
ROLLER – Part Number: 317005701
ROLLER
PartSelect #: PS440416
Manufacturer #: 317005701
  No Longer Available
SCREW – Part Number: 394027600
SCREW
PartSelect #: PS449367
Manufacturer #: 394027600
  No Longer Available
HARNESS-WIRING – Part Number: 317000503
HARNESS-WIRING
PartSelect #: PS440381
Manufacturer #: 317000503
  No Longer Available
BRACKET-SWITCH – Part Number: 317000702
BRACKET-SWITCH
PartSelect #: PS440386
Manufacturer #: 317000702
  No Longer Available

Questions And Answers for 56-5383-10-01

Be the first to ask our experts a question about this model!

Common Symptoms of the 56-5383-10-01

[Viewing 1 of 1]
Tray won’t turn
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken carousel drive bushing
popped new peice on and that was it
Parts Used:
Carousel Tray Drive Bushing - 1/4" Shaft
  • Galen from lowanger, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic bushing broke --- turntable was just a non-turning table
It took me a burnt bag of Orville's popcorn to notice that the turntable wasn't turning. After a tantrum and a bit of foul language, I Googled the brand & model. Up popped Parts Select of whom I'd never heard. THE PARTS LOCATOR IS FANTASTIC! I found exactly what I needed---checked a few other sources, but found nothing. I was a bit hesitant at ordering, but decided any site as well designed and intricate as this couldn't be a fake. Next pleasant surprise was that after ordering late Dec 26, the part was on my doorstep Dec 28! I ripped open that envelope, trotted into the kitchen, and stuck that bushing right onto the thing-a-ma-gig. That baby spun like a merry-go-round! Parts Select gets 6 out of a possible 5 stars in my book!
Parts Used:
Carousel Tray Drive Bushing - 1/4" Shaft
  • Carolyn from Globe, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable motor was worn out - gears were slipping
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to add the gasket to the new part and run the two screws to the new motor and tighten! It don't get any easier than that! Also do not forget to plug the motor back into the female socket before attaching the bottom plate!
Parts Used:
MOTOR-TURNTABLE
  • Chad from Roanoke, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!