This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
I pulled out the glass turn table tray and put the bushing in the little whole, in the center of the bottom (under turn table tray). Fixed the problem right away. Working wonderful! Was happy with how easy it was to locate part. Had received this microwave as a wedding gift, feb. 1994. Thought I was going to have to replace. Thanks to your website I was able to locate and purchase the part needed to fix the problem in less than 1 minute. I thanks you. I love this particular microwave!
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to add the gasket to the new part and run the two screws to the new motor and tighten! It don't get any easier than that! Also do not forget to plug the motor back into the female socket before attaching the bottom plate!