This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretche...Read mored, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
This genuine OEM axle shaft pin is designed for use with Murray and Simplicity snow throwers. Made from durable metal, this part securely connects the wheel to the axle shaft, ensuring proper traction and movement during operation.
To ensure compatibility, it’s recommended to consult your model’s parts diagram before ordering. This pin...Read more is sold individually and is an essential component for maintaining the structural integrity and performance of your snow thrower.
This is an authentic manufacturer-sourced item that is specially designed for Murray and Simplicity snowthrowers. It connects the control lever to the clutch in the drive system allowing a user to engage and disengage the unit. Please note this durable rubber insulated metal clutch cable is sold individually. Make sure to refer to the app...Read moreropriate diagrams of your model for the correct location and application of this component.
This is a genuine Craftsman part for use with Craftsman Snowblowers. The Shear pin kit connects the auger to the rotating drive shaft. The shear pin is made of soft metal that purposely shears off or breaks to protect the transmission and motor if a foreign object or hard-packed snow binds the auger. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
This authentic manufacturer-sourced part which is specially designed for use with Craftsman equipment. The ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunatel...Read morey, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually.
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use with Craftsman air compressors. During replacement, it may require a wrench to help install these parts correctly. They will require replacing if they become bent or broken.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken - For model number 536887992
December 5, 2022
I had a shear pin on the main auger shaft shear and wanted to know if there is a known way to get the sheared pin out of the shaft with out tearing the whole front end apart ?
Hello Ken, thank you for contacting us. You can easily replace the shear pin on the auger shaft without opening the whole front end apart. Move the throttle control to the stop position. Disengage all controls. Disconnect the spark plug wire. Make sure all moving parts have stopped. Unscrew the nut on the other end of the shear pin and remove the shear pin. Align the hole in the auger with the hole in the auger shaft. Install the new shear pin, part number PS9894323. We hope this solves your problem!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
John - For model number 536887992
December 23, 2023
Will same size Toro snow blower left auger fit craftsman 9hp 29in cut model #536887992 and where can I I get one if it does
Hello John, thank you for your question. We can find parts using the model number. The left auger for the model specified is PS9894311 and the Right Auger PS9894310. Please submit a new question if you have any follow ups.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 peoplefound this instruction helpful.
Kenneth from ALDAN, PA
Easy
30 - 60 mins
Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel.
... Read more This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.