536886332 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gasket-intake – Part Number: 27355S
$6.95
Special Order
Gasket-intake
Part #27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburetor. Over time gaskets tend to deteriorate and would need to be replaced. It is made out of compound material and it is sold individually. You would need a screwdriver to replace this item.
Pin – Part Number: 500016MA
$29.95
Special Order
Pin
Part #500016MA
This genuine OEM axle shaft pin is designed for use with Murray and Simplicity snow throwers. Made from durable metal, this part securely connects the wheel to the axle shaft, ensuring proper traction and movement during operation. To ensure compatibility, it’s recommended to consult your model’s parts diagram before ordering. This pin is sold individually and is an essential component for maintaining the structural integrity and performance of your snow thrower.
KEYSTOCK, 3/16X.875 – Part Number: 703888
$7.95
Special Order
KEYSTOCK, 3/16X.875
Part #703888
Carriage Bolt – Part Number: STD533107
No Longer Available
Carriage Bolt
Part #STD533107
Washer 8Pk – Part Number: STD551125
No Longer Available
Washer 8Pk
Part #STD551125
Screw 2Pk – Part Number: STD523717
No Longer Available
Screw 2Pk
Part #STD523717
Nut 8Pk – Part Number: STD541410
No Longer Available
Nut 8Pk
Part #STD541410
Tension Spring – Part Number: 780207MA
No Longer Available
Tension Spring
Part #780207MA
Screw 5Pk – Part Number: STD523707
No Longer Available
Screw 5Pk
Part #STD523707
Flat Washer – Part Number: 50677MA
No Longer Available
Flat Washer
Part #50677MA
Screw 8Pk – Part Number: STD511003
No Longer Available
Screw 8Pk
Part #STD511003
Starter Kit – Part Number: 33-738
No Longer Available
Starter Kit
Part #33-738

Questions And Answers for 536886332

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill - For model number 536886332
March 25, 2024
When Drive is engaged it does not move forward or reverse.
Chris Boyle Profile
Hi Bill, thank you for reaching out. We would suggest checking the drive belt first. If it is fine, the issue could be with the traction cable, part number PS9982009. It connects the control lever to the clutch in the drive system in the snow blower. You may need to replace it to fix the issue. We hope this solves your problem!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 536886332

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people found this instruction helpful.
  • Kenneth from ALDAN, PA
  • Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Was this helpful?
Thank you for voting!