536885201 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Nut 8Pk – Part Number: STD541037
No Longer Available
Nut 8Pk
Part #STD541037
Screw – Part Number: STD522506
No Longer Available
Screw
Part #STD522506
Screw 5Pk – Part Number: STD523107
No Longer Available
Screw 5Pk
Part #STD523107
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special screw is used with several different models of compressors and the application of the screw can vary based on the model of the machine. This item is available as an individual replacement part.
1/4-20 Hex Lock Nut – Part Number: STD541425
No Longer Available
1/4-20 Hex Lock Nut
Part #STD541425
This is a genuine replacement part sourced directly from the manufacturer. The hex lock nut is commonly found in power tools and yard equipment from Craftsman, such as radial saws and snowblowers. This part is made of metal, and is generally used with a bolt or threaded shaft to secure components in the machine. It may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This is an individually sold part.
203 Brg – Part Number: STD315235
No Longer Available
203 Brg
Part #STD315235
This authentic manufacturer-sourced part which is specially designed for use with Craftsman equipment. The ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually.
Nut 8Pk – Part Number: STD541031
No Longer Available
Nut 8Pk
Part #STD541031
During the installation process, a wrench will be needed to replace this part. It may become broken or stripped and will need to be replaced. It is an authentic OEM sourced item which is specially produced for use with Craftsman compressors and paint sprayers. The nut is made out of metal. This is available as a pack of eight nuts.
Flat Washer, 8Pk – Part Number: STD551031
No Longer Available
Flat Washer, 8Pk
Part #STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use with Craftsman air compressors. During replacement, it may require a wrench to help install these parts correctly. They will require replacing if they become bent or broken.
Washer 8Pk – Part Number: STD551037
No Longer Available
Washer 8Pk
Part #STD551037
This replacement washer is supplied by the original equipment manufacturer for use with Craftsman equipment. It helps to distribute the pressure evenly and provide a tight seal between the connected pieces. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality pack includes eight durable metal washers.
Locknut – Part Number: STD541431
No Longer Available
Locknut
Part #STD541431
This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on a new unit. This is a standard hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold in a pack of eight.
Band Saw Blade Guide – Part Number: 823572
No Longer Available
Band Saw Blade Guide
Part #823572
This is a genuine Ridgid replacement part, it is sold individually. The purpose of the 823572 Guide Block is to keep the the bandsaw blade as straight and vertical as possible when cutting material. There are four Guide Blocks on the bandsaw. To adjust the Guide Blocks • Two adjustments must be made. • First, the block guides must be adjusted in the back-forward direction so that the blocks themselves are centered on the width of the blade. • The block guides must also be adjusted in the side-to-side direction. Adjust the block guides so that the blocks themselves just barely touch the bandsaw blade.
Cap Crank Rod – Part Number: 762273MA
No Longer Available
Cap Crank Rod
Part #762273MA
Axle – Part Number: 762280MA
No Longer Available
Axle
Part #762280MA

Manuals & Care Guides for 536885201

Click to download

Common Symptoms of the 536885201

How this model fails, and the parts that fix it.