536881112 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Drive Cable (12'') – Part Number: 1501122MA
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretched, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
Nut 8Pk – Part Number: STD541037
No Longer Available
Nut 8Pk
Part #STD541037
Pin 8Pk – Part Number: STD560907
No Longer Available
Pin 8Pk
Part #STD560907
Washer – Part Number: 017X91MA
No Longer Available
Washer
Part #017X91MA
Washer 8Pk – Part Number: STD551050
No Longer Available
Washer 8Pk
Part #STD551050
Auger Cable – Part Number: 761591MA
No Longer Available
Auger Cable
Part #761591MA
Starter Kit – Part Number: 33-738
No Longer Available
Starter Kit
Part #33-738
Danger Decal – Part Number: 761916MA
No Longer Available
Danger Decal
Part #761916MA
Screw 5Pk – Part Number: STD523107
No Longer Available
Screw 5Pk
Part #STD523107
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special screw is used with several different models of compressors and the application of the screw can vary based on the model of the machine. This item is available as an individual replacement part.
203 Brg – Part Number: STD315235
No Longer Available
203 Brg
Part #STD315235
This authentic manufacturer-sourced part which is specially designed for use with Craftsman equipment. The ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality bearing is made of durable metal and is sold individually.
Ties 8Pk – Part Number: STD426600
No Longer Available
Ties 8Pk
Part #STD426600
Nut 8Pk – Part Number: STD541031
No Longer Available
Nut 8Pk
Part #STD541031
During the installation process, a wrench will be needed to replace this part. It may become broken or stripped and will need to be replaced. It is an authentic OEM sourced item which is specially produced for use with Craftsman compressors and paint sprayers. The nut is made out of metal. This is available as a pack of eight nuts.

Manuals & Care Guides for 536881112

Click to download

Common Symptoms of the 536881112

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people found this instruction helpful.
  • Kenneth from ALDAN, PA
  • Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Was this helpful?
Thank you for voting!