536799100 Craftsman Leaf Blower / Vacuum - Overview

Diagrams for 536799100

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Seal-O Ring – Part Number: 691870
$7.95
Special Order
Seal-O Ring
Part #691870
Engine Dipstick Tube Seal – Part Number: 281370S
$14.95
Special Order
Engine Dipstick Tube Seal
Part #281370S
This item is a genuine replacement part that has been OEM sourced and is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The rubber seal is used to prevent oil from leaking at the connection between the bottom of the oil fill tube and the crankcase. This item also allows the fill tube to firmly sit into the case. The dipstick tube seal if available as an individual replacement part.
Dipstick – Part Number: 495234
No Longer Available
Dipstick
Part #495234
Cap-fuel Tank – Part Number: 493982S
No Longer Available
Cap-fuel Tank
Part #493982S
This is an authentic replacement part manufactured for use with small engines. The metal cap is used to seal or cover the fill spout on the engine's fuel tank. This fuel tank cap is available as an individual replacement part, please see model diagram for associative parts.
Nut 8Pk – Part Number: STD541410
No Longer Available
Nut 8Pk
Part #STD541410
Special Screws – Part Number: STD522517
No Longer Available
Special Screws
Part #STD522517
Screw 5Pk – Part Number: STD523106
No Longer Available
Screw 5Pk
Part #STD523106
Nut 8Pk – Part Number: STD541031
No Longer Available
Nut 8Pk
Part #STD541031
During the installation process, a wrench will be needed to replace this part. It may become broken or stripped and will need to be replaced. It is an authentic OEM sourced item which is specially produced for use with Craftsman compressors and paint sprayers. The nut is made out of metal. This is available as a pack of eight nuts.
Lock Washer – Part Number: STD551131
No Longer Available
Lock Washer
Part #STD551131
This is an authentic replacement part sourced directly from the manufacturer. The lock washer is commonly found in Craftsman equipment such as compressors, paint sprayers, drill presses, and lathes. This is a set of eight metal lock washers, which may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item.
Screw 8Pk – Part Number: STD611007
No Longer Available
Screw 8Pk
Part #STD611007
Screw 2Pk – Part Number: STD623717
No Longer Available
Screw 2Pk
Part #STD623717
Tube-dipstick – Part Number: 280131
No Longer Available
Tube-dipstick
Part #280131