51013 (AST2SER) LG Refrigerator - Overview

Diagrams for 51013

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Lever Spring – Part Number: 4970JA3011K
$13.15
In Stock
Refrigerator Lever Spring
Part #4970JA3011K
Door Basket – Part Number: MAN61844401
$120.36
On Order
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Light Bulb
Part #6912JB2004M
Refrigerator Hinge Assemblylower – Part Number: 4775JA2113A
$56.05
In Stock
Guide,Rail – Part Number: 4974JA1105B
$24.95
On Order
Guide,Rail
Part #4974JA1105B
DC Motor – Part Number: EAU59551204
$64.85
In Stock
Guide Rail - Right Side – Part Number: MEA40002601
$30.75
In Stock
Guide Rail - Right Side
Part #MEA40002601
This is an authentic OEM part sourced directly from the manufacturer. The crisper slide rail for your refrigerator allows the crisper drawer to slide in and out, and supports the drawer as it does so. This part is for the right side of your crisper drawer. Please note that the roller for this guide rail is a separate part under part number PS11759956.
Defrost Sensor Assembly – Part Number: 6500JB2001B
$36.25
In Stock
Defrost Sensor Assembly
Part #6500JB2001B
Tube Connector – Part Number: 4932JA3002C
$31.85
In Stock
Tube Connector
Part #4932JA3002C
Tank,Water – Part Number: MJM61904702
$114.33
Special Order
Tank,Water
Part #MJM61904702
Lever Hinge – Part Number: 4510JA3004A
$17.55
In Stock
Lever Hinge
Part #4510JA3004A
Refrigerator Door Basket – Part Number: MAN61844601
$85.03
Special Order
Refrigerator Door Basket
Part #MAN61844601

Exact Part matches for your search term

NLATOPPAD – Part Number: 51013
No Longer Available
NLATOPPAD
This part number matches the current model number 51013
Part #51013

Common Symptoms of the 51013

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Squeeking
17 of 21 people found this instruction helpful.
  • Kyle from WOODBURY, MN
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable)
Detected noise as coming from top freezer department, and tips and part diagram clearly pointed to evaporator fan. You go in through the freezer (you have to empty top half of freezer); removing the side rails holding the ice bin, and then the 4 outer screws (only 2 each side - not the middle ones) holding the 'auger' that turns the bin . From there it gets interesting in trying to disconnect the wires. You might consider taking some pictures of the connected wires - perhaps it doesn't matter, but several of them can be hooked up in reverse. After the ice marker is out, remove light and light cover, side rails/mounts that hold hold up ice maker. This leaves a large white cover that pops out (seam at bottom of it has two tabs that you can pop out) holding the fan; and then only a few more wires to disconnect to be able to get at the fan. Mine clearly had a wobble to it confirming the source of the squeak and need to replace. Install was just reverse -- a bit tricky to get some of the wires connected given the tight spaces. Overall, not difficult - but a lot of wires and screws to connect/disconnect. I didn't take any pictures as I disassembled, and found myself having to take some extra time to figure it out as I reassembled. In the end -- a silent and functioning refrigerator Good luck!
Was this helpful?
Thank you for voting!
Replace Gasket on refrigerator door
6 of 10 people found this instruction helpful.
  • Curtis from DEMOPOLIS, AL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
The replacement gasket does not have as strong a magnet as the original one. I removed the old one carefully so as not to cause more damage in case I have to put it back. Using Tongue suppressor I pushed new gasket into place and put a thin coating of protelem jelly on the gasket. I just have to make sure the door is closed each time to be sure of good seal.
Was this helpful?
Thank you for voting!
Broken Guide Rail
4 of 6 people found this instruction helpful.
  • Nicole from BROOKSVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
This site was awesome! I was able to very quickly look up my refrigerator model, find the proper part number, and order the part. The only suggestion I would make is to update the cut sheet with a more clear version, it was a little difficult to make out the part number because the scan/drawing was fuzzy, but I was still able to make it out. Got the part in the mail very quickly and it was super easy to remove the old rail and install the new one. Take out the screws from the old one, remove the old rail, line up the holes, install the new one, and put back the screws. It's so nice to have a site like this to fine parts and order them! Too cool! Thank you so much!
Was this helpful?
Thank you for voting!