51012 (ASWCSER) LG Refrigerator - Overview

Diagrams for 51012

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Handle Screw – Part Number: MJB63190001
$13.15
In Stock
Handle Screw
★★★★★
★★★★★
(2)
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.
Refrigerator Lever Spring – Part Number: 4970JA3011K
$13.15
In Stock
Refrigerator Lever Spring
Part #4970JA3011K
Door Basket – Part Number: MAN61844401
$120.36
On Order
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Light Bulb
Part #6912JB2004M
Refrigerator Inlet Tube – Part Number: 5040JA2015A
$42.85
Special Order
Refrigerator Inlet Tube
Part #5040JA2015A
Guide,Rail – Part Number: 4974JA1105B
$24.95
On Order
Guide,Rail
Part #4974JA1105B
Refrigerator Hinge Assemblylower – Part Number: 4775JA2113A
$56.05
In Stock
DC Motor – Part Number: EAU59551204
$64.85
In Stock
Guide Rail - Right Side – Part Number: MEA40002601
$30.75
In Stock
Guide Rail - Right Side
Part #MEA40002601
This is an authentic OEM part sourced directly from the manufacturer. The crisper slide rail for your refrigerator allows the crisper drawer to slide in and out, and supports the drawer as it does so. This part is for the right side of your crisper drawer. Please note that the roller for this guide rail is a separate part under part number PS11759956.
Defrost Sensor Assembly – Part Number: 6500JB2001B
$36.25
In Stock
Defrost Sensor Assembly
Part #6500JB2001B
Refrigerator Plastic Tube – Part Number: 5210JA3005A
$20.85
Special Order
Refrigerator Plastic Tube
Part #5210JA3005A
Tank,Water – Part Number: MJM61904702
$114.33
Special Order
Tank,Water
Part #MJM61904702

Common Symptoms of the 51012

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Squeeking
17 of 21 people found this instruction helpful.
  • Kyle from WOODBURY, MN
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable)
Detected noise as coming from top freezer department, and tips and part diagram clearly pointed to evaporator fan. You go in through the freezer (you have to empty top half of freezer); removing the side rails holding the ice bin, and then the 4 outer screws (only 2 each side - not the middle ones) holding the 'auger' that turns the bin . From there it gets interesting in trying to disconnect the wires. You might consider taking some pictures of the connected wires - perhaps it doesn't matter, but several of them can be hooked up in reverse. After the ice marker is out, remove light and light cover, side rails/mounts that hold hold up ice maker. This leaves a large white cover that pops out (seam at bottom of it has two tabs that you can pop out) holding the fan; and then only a few more wires to disconnect to be able to get at the fan. Mine clearly had a wobble to it confirming the source of the squeak and need to replace. Install was just reverse -- a bit tricky to get some of the wires connected given the tight spaces. Overall, not difficult - but a lot of wires and screws to connect/disconnect. I didn't take any pictures as I disassembled, and found myself having to take some extra time to figure it out as I reassembled. In the end -- a silent and functioning refrigerator Good luck!
Was this helpful?
Thank you for voting!
Broken Guide Rail
4 of 6 people found this instruction helpful.
  • Nicole from BROOKSVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
This site was awesome! I was able to very quickly look up my refrigerator model, find the proper part number, and order the part. The only suggestion I would make is to update the cut sheet with a more clear version, it was a little difficult to make out the part number because the scan/drawing was fuzzy, but I was still able to make it out. Got the part in the mail very quickly and it was super easy to remove the old rail and install the new one. Take out the screws from the old one, remove the old rail, line up the holes, install the new one, and put back the screws. It's so nice to have a site like this to fine parts and order them! Too cool! Thank you so much!
Was this helpful?
Thank you for voting!
Brocken rails
3 of 4 people found this instruction helpful.
  • Jose from PHOENIX, AZ
  • Very Easy
  • Less than 15 mins
Very easy to replace right and left rail 3 screws on each side
Was this helpful?
Thank you for voting!