50092502 Craftsman Engine - Overview

Diagrams for 50092502

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Muffler – Part Number: 394569S
$19.95
Special Order
Muffler
Part #394569S
This is an authentic exhaust muffler specially designed for Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is supplied directly from original equipment manufacturer and it is sold individually. Muffler softens the noise coming from the engine and provides an additional layer of filtration of exhaust. This metal muffler is manufactured to meet EPA exhaust regulations.
Clutch-starter – Part Number: 399671
$70.95
Special Order
Clutch-starter
Part #399671
Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turns the crankshaft during starting and lets go when the engine runs. First inspect the rope, rewind spring, pulley, flywheel screen, and clutch bearing. Confirm fit with the complete engine number. Remove the spark plug wire, wait for hot parts to cool, and keep dirt out of the bearing area. Test free movement before putting the shroud back on.
Seal-o Ring – Part Number: 691876
$9.95
Special Order
Seal-o Ring
Part #691876
Insert-grip – Part Number: 396892
$8.95
Special Order
Insert-grip
Part #396892
The grip insert attaches to the starter rope. This is an OEM Briggs & Stratton, Toro, and Lawn Boy part directly sourced from the manufacturer for use in blowers, engines, generators, lawn mowers, pressure washers, and vacuums. Keep in mind that this part is sold individually. It is made out of plastic and will need to be replaced if it breaks.
Seal-oil – Part Number: 391483S
$10.95
Special Order
Seal-oil
Part #391483S
This is an authentic replacement part manufactured for use with small engines. This oil seal keeps oil inside the crankcase, and seals the shaft. It is recommended to replace the crankcase gasket when servicing the case, the gasket is available separately. The oil seal is sold individually.
Gasket-crkcse/009 – Part Number: 270896
$10.95
Special Order
Gasket-crkcse/009
Part #270896
This is a genuine replacement part that is OEM sourced to be used with lawnmower engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the body of the crankcase and the cover. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is sold individually.
Gasket-air Cleaner – Part Number: 271139S
$6.95
Special Order
Gasket-air Cleaner
Part #271139S
Seal-o Ring – Part Number: 270344S
$5.95
In Stock
Seal-o Ring
Part #270344S
This authentic OEM replacement part fits a variety of Toro and Briggs & Stratton engines. An O ring is used to retain pressure between rigid parts. Its flexible material allows it to create a tight seal. Many different sizes of O ring are used in these engines; consult manual to be sure of correct placement. Sold individually.
Gasket-choke Cover – Part Number: 270571
$12.95
Special Order
Gasket-choke Cover
Part #270571
Seal-throttle Shaft – Part Number: 270167
$8.95
Special Order
Seal-throttle Shaft
Part #270167
This is an authentic Briggs & Stratton replacement part. The throttle shaft seal is commonly found in small engines, such as those used for yard equipment. This part is made of felt, and is used to prevent leakage in the connection between the throttle shaft and the engine. Over time, this part may become worn or frayed, and need replacement. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.
Pin-piston/std – Part Number: 298909
$15.95
Special Order
Pin-piston/std
Part #298909
Spacer-air Cleaner – Part Number: 280374
$12.95
Special Order
Spacer-air Cleaner
Part #280374
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Push mower leaked under neath.
2 of 2 people found this instruction helpful.
  • Raymond from Coalport, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!
Muffler rusted out
7 of 18 people found this instruction helpful.
  • Snoopy from TYRONE, GA
  • Very Easy
  • 30 - 60 mins
hand tightened with threads into threaded insert
Was this helpful?
Thank you for voting!