5006HSF Craftsman Engine - Overview

Diagrams for 5006HSF

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Seal-oil – Part Number: 391483S
$10.95
Special Order
Seal-oil
Part #391483S
This is an authentic replacement part manufactured for use with small engines. This oil seal keeps oil inside the crankcase, and seals the shaft. It is recommended to replace the crankcase gasket when servicing the case, the gasket is available separately. The oil seal is sold individually.
Spring-needle Valve – Part Number: 691592
$6.95
Special Order
Spring-needle Valve
Part #691592
The needle valve spring goes next to the idle mixture valve and is made of metal. This is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with engines, generators, tillers, blower-vacuums, and lawn mowers made by Briggs & Stratton and Toro. During replacement, it may require a screwdriver and a wrench set to help install this part correctly. It will require replacing if it becomes bent or broken.
Seal-o Ring – Part Number: 691606
$9.95
Special Order
Seal-o Ring
Part #691606
This authentic manufacturer-supplied washer is specially designed for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a damaged packing-needle valve that was installed on a new unit. One durable rubber part is included. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure.
Plug-oil Drain – Part Number: 690946
$10.95
Special Order
Plug-oil Drain
Part #690946
An authentic item that is supplied by the original manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality replacement for a faulty or missing oil drain plug that came installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind it is made of durable metal and is sold individually.
Washer – Part Number: 691261
$6.95
Special Order
Washer
Part #691261
This washer is a genuine OEM Briggs & Stratton replacement used in small gasoline engines to provide secure fastening, proper spacing, or load distribution between engine components. Made to original factory specifications, it helps maintain correct assembly and reliable operation and is an ideal replacement when a worn, missing, or damaged washer causes looseness, vibration, or improper component fit.
Screw – Part Number: 690661
$5.95
Special Order
Screw
Part #690661
The metal screw attaches to the muff guard bracket. It is a genuine replacement part sourced from the original manufacturer for use with blowers, engines, generators, pressure washers, snowblowers, and vacuums made by Briggs & Stratton, Toro, and Lawn Boy. This item is available as an individual replacement part. When replacing this screw a wrench will be needed. It will need to be replaced if it strips or breaks.
Retainer-Valve – Part Number: 691760
No Longer Available
Retainer-Valve
Part #691760
Seal-oil – Part Number: 299819S
No Longer Available
Seal-oil
Part #299819S
This item is an authentic part that is OEM sourced to ensure quality. The oil seal is intended to be used with small engines from Briggs & Stratton and Toro. This item is used to prevent leaks and to stop contaminants from entering the space between the crankshaft and the crankcase. This seal is priced as a single item.
Valve-Intake – Part Number: 23386
No Longer Available
Valve-Intake
Part #23386
Breaker-ignition – Part Number: 29667
No Longer Available
Breaker-ignition
Part #29667
Gasket-fuel Tank – Part Number: 27404
No Longer Available
Gasket-fuel Tank
Part #27404
A genuine item which is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality gasket that helps to provide an air-tight seal for the fuel tank, please refer to the appropriate diagram of your model for the correct location and application of this item. Over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.
Plunger-brkr – Part Number: 65704S
No Longer Available
Plunger-brkr
Part #65704S
The plunger is a genuine item that is supplied by the original equipment manufacturer for use with blowers, engines, generators, lawn mowers, snowblowers, and vacuums made by Briggs & Stratton and Toro. During replacement, it may require a wrench and a screwdriver to help install this part correctly. This part may become broken and will need to be replaced. It is made out of metal and is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Push mower leaked under neath.
2 of 2 people found this instruction helpful.
  • Raymond from Coalport, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!