This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
The drain hose carries used water from the washer to your house drain.
$31.80
In Stock
Questions And Answers for 4GWTW4740YQ1
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jorge
November 28, 2022
Lava ,enjuaga , centrífuga y al final
No descarga toda el agua
For model number 4GWTW4740YQ1
Hola Jorge, gracias por tu consulta. Hemos investigado el número de modelo que ha proporcionado y le recomendamos que compruebe las siguientes piezas para solucionar el problema: la bomba de drenaje, la manguera de la bañera a la bomba y la manguera de drenaje. También recomendamos revisar el filtro de pelusa debajo de la tina para ver si hay obstrucciones o daños visibles. Buena suerte con su reparación y si necesita ayuda para realizar un pedido, no dude en llamar a nuestro servicio de atención al cliente, abierto los 7 días de la semana para ayudarlo. Esperamos con interés escuchar de usted.
Hello Jorge, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the drain pump, the tub to pump hose, and the drain hose. We would also recommend checking the lint filter underneath the tub for any clogs or visible damage. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service, open 7 days a week to help you. We look forward to hearing from you.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.