49E877-0036-Z1 Briggs and Stratton Engine - Overview
Sections of the 49E877-0036-Z1
[Viewing 25 of 25]-
Air Cleaner Group
-
Alternator Group
-
Blower Housing Group
-
Controls Group
-
Crankcase Cover/Sump Group
-
Crankshaft Group
-
Cylinder Group
-
Cylinder Head Group
-
Exhaust Group
-
Flywheel, Ignition, And Starter Group
-
Fuel Supply Group
-
Lubrication Group
-
Model 40, 44 And 49 Engine Accessories Catalog / Electrical
-
Model 40, 44 And 49 Engine Accessories Catalog / Engine Mounted Above Deck Mufflers
-
Model 40, 44 And 49 Engine Accessories Catalog / Engine Mounted Below Deck Mufflers
-
Model 40, 44 And 49 Engine Accessories Catalog / Exhaust/Muffler Configurations
-
Model 40, 44 And 49 Engine Accessories Catalog / Flywheel Guards
-
Model 40, 44 And 49 Engine Accessories Catalog / Implement Mounted Above Deck Mufflers
-
Model 40, 44 And 49 Engine Accessories Catalog / Lubrication
-
Model 40, 44 And 49 Engine Accessories Catalog / Maintenance Kits
-
Model 40, 44 And 49 Engine Accessories Catalog / Muffler Mounting Hardware
-
Model 40, 44 And 49 Engine Accessories Catalog / Spark Arrester/Deflector
-
Model 40, 44 And 49 Engine Accessories Catalog / Speed Control
-
Oil Guard Group
-
Throttle Body Group
Keep searches simple, eg. "belt" or "pump".
Sealant-liquid
PartSelect #: PS8816307
Manufacturer #: 100106
It is a genuine manufacturer-supplied item that is made for use with Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. This is a special liquid sealant...
$24.95
Special Order
18oz 30w 4 Cycle Oil
PartSelect #: PS8817222
Manufacturer #: 100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This...
$8.95
In Stock
Order within the next 5 hrs and your part ships today!
Arm-rocker
PartSelect #: PS9062431
Manufacturer #: 690972
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This is a high-quality...
$23.95
Special Order
Gasket-air Cleaner
PartSelect #: PS9063576
Manufacturer #: 691001
It is a genuine manufacturer-approved replacement part which is supplied for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This special gasket helps to provide ...
$5.95
Special Order
Lock-piston Pin
PartSelect #: PS9063614
Manufacturer #: 690975
This is an original Briggs & Stratton replacement part. The piston lock pin is commonly found in small engines. This part is made of metal, and is used to hold the piston pin in place in the piston....
$7.95
Special Order
Gasket-exhaust
PartSelect #: PS9063564
Manufacturer #: 690970
This is a genuine OEM sourced replacement exhaust gasket. It is specially made for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. Its purpose is to provide an ai...
$8.95
Special Order
Gasket-rocker Cover
PartSelect #: PS9062980
Manufacturer #: 690971
Authentic Manufacturer Sourced replacement part used on a variety of Engines. This rocker cover gasket is for the cylinder head. It is sold Individually. It provides a strong seal to protect from leak...
$12.95
In Stock
Order within the next 5 hrs and your part ships today!
Lever-control
PartSelect #: PS9062994
Manufacturer #: 691028
This is an original replacement part sourced directly from the manufacturer. The control lever is commonly found in engines, generators, and pressure washers from Briggs & Stratton, and in lawn tract...
$85.95
Special Order
Common Symptoms of the 49E877-0036-Z1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bad governor
Look on YouTube for video's on how to replace a Briggs governor. There are several there. My favorite, with best explanation, is, "Easily Replace Briggs Governor Gear (V-Twin Intek Engine) with Taryl". https://www.youtube.com/watch?v=wn3eanGxSEA&t=152s.
Taryl (probably not his real name) does a very good job of showing step-by-step the whole procedure, along with some additional hints/tricks/techniques of value.
Not including oil and filter, I spent less than $50 for a new governor, gasket, and drive shaft seal. That's all that is really necessary to replace is those three parts. That is, unless pieces of the old governor tore up a gear, valve, or something else. Inspect everything! {I was lucky and only the governor was destroyed}
One word of note. Be sure to clean out all of the debris from the blown governor. Be sure to remove the spark plugs and carefully rotate the drive shaft while looking for nooks-and-crannies where debris can hide. I tried to use a magnet to help, but it didn't help much, even though the block is aluminum.
Good luck.
Taryl (probably not his real name) does a very good job of showing step-by-step the whole procedure, along with some additional hints/tricks/techniques of value.
Not including oil and filter, I spent less than $50 for a new governor, gasket, and drive shaft seal. That's all that is really necessary to replace is those three parts. That is, unless pieces of the old governor tore up a gear, valve, or something else. Inspect everything! {I was lucky and only the governor was destroyed}
One word of note. Be sure to clean out all of the debris from the blown governor. Be sure to remove the spark plugs and carefully rotate the drive shaft while looking for nooks-and-crannies where debris can hide. I tried to use a magnet to help, but it didn't help much, even though the block is aluminum.
Good luck.
Parts Used:
-
John from BROOKVILLE, IN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Socket set, Wrench set
11 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!