4331DWD Makita Saw - Overview

This is an original Makita replacement part. The bolt is commonly found in power tools such as jig saws and rotary hammers. This part is made of metal, and may be used in different locations in the machine, depending on model. Please be aware that there are different bolts used in the machine. Refer to the parts diagram to be sure of ...Read moreordering the correct part. You will require an Allen or hex wrench when replacing this part. This item is sold individually.

This is a genuine OEM replacement part manufactured for use with Makita power tools. The hexagonal nut is used with several different types of equipment and the application of the nut can vary based on the model of the power tool. This hex nut is available as an individual replacement part.

The retaining ring fits next to the helical gear. This is a genuine Makita part sourced directly from the manufacturer for use in saws. This part is priced individually and is made of metal. A screwdriver and a set of snap ring pliers might be required during the replacement of this part. It will require replacing if it becomes broken.

This is an authentic manufacturer-sourced part which is specially desgined for use with Makita power tools. The stop ring is commonly generally utilized to secure a component to a shaft or a spindle, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Genuine Makita replacement part this item is sold individually. E-rings are mostly used to keep a part in place and keep it from moving. This part is used in various areas of the different models of tools shown below.

This is an original Makita part for use in saws, drills, nibblers, planers, polishers, sanders, and shears. The flat washer goes between the gear shaft and the needle bearing. During the installation process, an allen wrench and a set of pliers might be needed to replace this part. It will need to be replaced if it becomes broken. This is made of metal and is sold individually.

It is a genuine item which is supplied directly from the original equipment manufacturer for use with Makita saws. The purpose of this flat washer is to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable part is made of high-quality metal and is sold individually.

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This specially manufactured replacement brush holder cap is used on Makita power tools. It is designed to secure the carbon brush in the brush holder. This threaded plastic cap is sold individually. Be careful when removing and replacing these, as they do have a tendency to break or get lost. It features a straight slot to accommodate for a flat head screwdriver to install or remove this cap.

This is a genuine OEM sourced replacement part commonly utilized on Makita saws. The purpose of this component is to allow a user to control the on/off function of the tool, over time parts may wear out and begin to fail eventually requiring a replacement. It is a high-quality switch which has a durable plastic body and is sold individually.

This high-quality OEM approved hardware is specially made for use with Makita power tools. It is a standard tapping screw that may have multiple applications. A self-tapping screw is a screw that can tap its own hole as it is driven into the material. Check the appropriate diagrams of your model for the exact location and the correct appl...Read moreication of this component. This high-quality screw is made of durable metal and is sold individually. Note, you will need a screwdriver to secure or remove it.