4323K Makita Saw - Overview

This is a standard hardware which has different uses based on different tools it is compatible with. It is designed for Makita power tools. Please refer to the appropriate diagram for correct application of this bolt. It is a hex socket head bolt which is sold individually. When doing this repair you would need an allen wrench/hex key to remove or install this bolt.

This authentic item is supplied directly from the original equipment manufacturer for use with jig saws and rotary hammers made by Makita. The metal bolt attaches to the clamp, the base, and the holder. During replacement, it will require an allen wrench to help install this part correctly. It will need to be replaced if it becomes stripped or broken. This part is available as an individual replacement.

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This 5 x 8 carbon brush holder is a genuine OEM replacement part used in various outdoor power equipment. It is a small plastic box with a cavity, and it is located near the engine assembly. The brush holder is responsible for holding and making electrical contact with the carbon brushes. The carbon brushes provide electrical current to t...Read morehe moving parts of the equipment. A faulty carbon brush holder will lead to reduced power output or complete loss of power. You will notice difficulties starting the engine, and the equipment may shut off during use. To begin the repair, first disconnect the power source. Remove the motor housing cover to access the holder and release the old brushes. Attach the new holder in place and reinsert the carbon brushes. Reassemble your equipment and switch it back on to check for functionality. Each brush holder is sold individually.

It is an authentic OEM replacement switch which is specially designed for use with Makita jig saws and sanders. This mechanical switch allows a user to turn the equipment on and off, over time components may begin to wear out and fail eventually requiring a replacement. It is a high-quality component which is made of durable plastic and it is sold individually.

This is an authentic part that is supplied directly from the original equipment manufacturer for Makita jigsaws. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.

This flange-head tapping screw is 4 mm wide and 35 mm long. It is used to hold housings or other parts together on select power tools and outdoor equipment. Use the full tool model and type number to guarantee the proper fit and location.

This is an authentic Makita replacement part, sourced from the original manufacturer for use with jigsaws and impact wrenches. The hex socket head bolt is used with different types of tools and the application of the bolt can vary based on the model of the equipment. This bolt is available as an individual replacement part.

This item is priced as an individual replacement part. The holder attaches to the base and is made of metal. An allen wrench and a screwdriver might be helpful during the installation of this part. It may become broken and will need to be replaced. This genuine item is supplied by the original equipment manufacturer for use with Makita saws.