4300BV Makita Jig Saw - Overview

This is a genuine manufacturer approved replacement part. It is specially designed for Makita power tools. This screw is a standard hardware which has multiple used depending on a tool. Please refer to diagrams to ensure proper fit. This pan-head screw includes a metal washer. Includes one (1) screw per order.

This replacement hardware is a genuine OEM sourced part, it is not an aftermarket imitation. It is a commonly used with Makita power tools. This standard hardware has multiple applications depending on the tool. Please refer to appropriate diagrams for correct location and use of this screw. It is a pan head screw which is sold individual...Read morely. You will need a Phillips head screwdriver to install or remove this hardware.

This is a standard hardware which has different uses based on different tools it is compatible with. It is designed for Makita power tools. Please refer to the appropriate diagram for correct application of this bolt. It is a hex socket head bolt which is sold individually. When doing this repair you would need an allen wrench/hex key to remove or install this bolt.

This is an OEM replacement part designed for use with Makita power tools. This is a standard hardware bolt which has multiple uses based on your unit. Please check diagrams for correct application of this bolt. Includes one (1) bolt and one (1) washer per order. Requires a hex key/allen wrench to tighten or loosen this bolt.

This is an original Makita replacement part. The hex socket head bolt is designed by the manufacturer for use in jig saws and multi-tools. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different bolts used in the machine. Refer to the parts diagram ...Read moreto be sure of ordering the correct part. You will require an Allen wrench or hex key when replacing this item. This part is sold individually.

This is an authentic replacement part manufactured Makita power tools. The flat washer is commonly used to disperse pressure across a wider area on a part assembly that is applied by a nut or bolt. This flat washer is used with multiple types of power tools, please see model diagram for part location and usage. The flat washer is sold as an individual replacement part.

The retaining ring fits next to the helical gear. This is a genuine Makita part sourced directly from the manufacturer for use in saws. This part is priced individually and is made of metal. A screwdriver and a set of snap ring pliers might be required during the replacement of this part. It will require replacing if it becomes broken.

Genuine Makita replacement part this item is sold individually. E-rings are mostly used to keep a part in place and keep it from moving. This part is used in various areas of the different models of tools shown below.

This is an original replacement part sourced directly from the manufacturer. The flat washer is commonly found in Makita power tools such as drills and screwdrivers. This part is made of metal, and is generally used to help secure the armature assembly. Please be aware that there are different washers used in the machine. Refer to the...Read more parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it has multiple applications based on your tool. Please refer to diagrams for correct application.