4201 Amana Microwave - Overview

Sections of the 4201

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 1 of 1]
Filter-a/c Foam – Part Number: 273356S
Filter-a/c Foam
This part number matches the current model number 4201
PartSelect #: PS8940470
Manufacturer #: 273356S
This is an OEM sourced replacement part used on Briggs and Stratton and Toro equipment. Its purpose is to provide an extra layer of protection from dust and other contaminants. One foam air cleaner fi...
$8.95
  Special Order
Keep searches simple, eg. "belt" or "pump".
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
$14.95
  In Stock
Screw – Part Number: WPW10068250
Screw
PartSelect #: PS11748102
Manufacturer #: WPW10068250
This screw is sold individually.
$10.95
  Special Order
SWITCH – Part Number: W10915404
SWITCH
PartSelect #: PS11769934
Manufacturer #: W10915404
$19.95
  Special Order
SCREW – Part Number: W11227370
SCREW
PartSelect #: PS12349585
Manufacturer #: W11227370
$28.95
  In Stock
DISCONTINUED – Part Number: 1330000301
DISCONTINUED
PartSelect #: PS52636
Manufacturer #: 1330000301
  No Longer Available
Nut – Part Number: M0282005
Nut
PartSelect #: PS1722350
Manufacturer #: M0282005
$14.95
  Special Order
DISCONTINUED – Part Number: 23644P01
DISCONTINUED
PartSelect #: PS777931
Manufacturer #: 23644P01
  No Longer Available
DISCONTINUED – Part Number: M16D97
DISCONTINUED
PartSelect #: PS2163859
Manufacturer #: M16D97
  No Longer Available
BRACKET- C – Part Number: 74001039
BRACKET- C
PartSelect #: PS2080160
Manufacturer #: 74001039
  No Longer Available
NUT 1 4-20 – Part Number: 70001791
NUT 1 4-20
PartSelect #: PS2074595
Manufacturer #: 70001791
  No Longer Available
SCREW – Part Number: M0227520
SCREW
PartSelect #: PS2162690
Manufacturer #: M0227520
  No Longer Available
.187 DIA P – Part Number: 5039-T
.187 DIA P
PartSelect #: PS2046263
Manufacturer #: 5039-T
$8.95
  Special Order

Common Symptoms of the 4201

[Viewing 1 of 1]
Won’t turn on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Parts Used:
Ceramic Fuse - 20 amp
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
27 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microve stopped working
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Parts Used:
Ceramic Fuse - 20 amp
  • Denice from Montgomery, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
15 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Died while heating lasagna
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
Parts Used:
Ceramic Fuse - 20 amp
  • connie from madison, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!