41799170120 Kenmore Washer Dryer Combo - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear Drum Bearing Kit – Part Number: 5303281153
$56.24
In Stock
Rear Drum Bearing Kit
★★★★★
★★★★★
(89)
Part #5303281153
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
Upper Drum Glide – Part Number: 5303937139
$69.78
On Order
Upper Drum Glide
★★★★★
★★★★★
(39)
Part #5303937139
The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.
Door Catch – Part Number: 131658800
$75.04
In Stock
Door Catch
★★★★★
★★★★★
(24)
Part #131658800
This part helps keep the door closed while the machine is running.
Drum Support Bearing – Part Number: 131825900
$12.91
In Stock
Drum Support Bearing
★★★★★
★★★★★
(9)
Part #131825900
The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.
Thermal Limiter - Limit 220 – Part Number: 134120900
$23.45
In Stock
Thermal Limiter - Limit 220
★★★★★
★★★★★
(16)
Part #134120900
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
Front Lower Drum Seal – Part Number: 5303283286
$61.37
Special Order
Front Lower Drum Seal
★★★★★
★★★★★
(5)
Part #5303283286
This part helps to keep the dryer running as quietly as possible.
Drive V-Belt – Part Number: 134511600
$31.95
In Stock
Drive V-Belt
★★★★★
★★★★★
(18)
Part #134511600
This belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
Multi-Rib Drum Belt – Part Number: 137292700
$16.80
In Stock
Multi-Rib Drum Belt
★★★★★
★★★★★
(7)
Part #137292700
This belt helps rotate from the drive motor to the drum.
Timer Knob – Part Number: 131859104
$77.18
In Stock
Timer Knob
★★★★★
★★★★★
(5)
Part #131859104
This knob accepts a D-shaped shaft.
Water Inlet Valve – Part Number: 134190200
$177.60
In Stock
Water Inlet Valve
★★★★★
★★★★★
(20)
Part #134190200
If your washer isn’t filling properly, leaking, or not cleaning clothes like it should, the water inlet valve might be the issue. This part controls how hot and cold water flows into your machine. It’s easy to install and comes with the bracket and screws you need. Just make sure it fits your model, and turn off the power and water before starting.
Door Strike – Part Number: 5303207102
$36.73
In Stock
Door Strike
★★★★★
★★★★★
(7)
Part #5303207102
"Male" piece of a dryer door closing mechanism.
High Limit Thermostat – Part Number: 3204267
$69.25
In Stock
High Limit Thermostat
★★★★★
★★★★★
(3)
Part #3204267
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit.

Common Symptoms of the 41799170120

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Loud Squeaking
355 of 386 people found this instruction helpful.
  • Frank from Boyertown, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum be lt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
Was this helpful?
Thank you for voting!
replace broken drive belt
285 of 320 people found this instruction helpful.
  • rodney from fairfield bay, AR
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub p ulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Was this helpful?
Thank you for voting!
Thermal Limiter opened
254 of 338 people found this instruction helpful.
  • Stephen from Newnan, GA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
Was this helpful?
Thank you for voting!