40250149 General Electric Dishwasher - Overview

Diagrams for 40250149

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drain Valve Shaft Seal – Part Number: WD8X181
$50.69
Special Order
Silverware Basket (Grey) – Part Number: WD28X265
$115.40
Special Order
Silverware Basket (Grey)
★★★★★
★★★★★
(6)
Part #WD28X265
This silverware basket is gray.
Rinse Aid Fill Cap – Part Number: WD12X10284
$78.79
Special Order
Rinse Aid Fill Cap
★★★★★
★★★★★
(5)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Impeller and Seal Kit – Part Number: WD19X10032
No Longer Available
Impeller and Seal Kit
★★★★★
★★★★★
(2)
Part #WD19X10032
This part helps stop your dishwasher from leaking. This kit includes the impeller, seal, blade, filter, skidder and skidder holder.
Motor and Pump Kit – Part Number: WD26X10013
$275.11
Special Order
Motor and Pump Kit
★★★★★
★★★★★
(4)
Part #WD26X10013
This pump and motor kit replaces many old style pump and motor kits that were manufactured since 1970. The instructions are included with this kit to help you to make it adaptable to your dishwasher. NOTE: This is a completely redesigned kit by the manufacturer and now includes the drain solenoid.
Third Level Spray Arm – Part Number: WD28X10103
$196.71
Special Order
Third Level Spray Arm
★★★★★
★★★★★
(5)
Part #WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray arm does not come with the screws.
Armature Link – Part Number: WD1X1316
$40.95
Special Order
Door Latch Knob – Part Number: WD9X351
$19.95
Special Order
Door Latch Knob
Part #WD9X351
This knob is attached to the dishwasher door latch mechanism.
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$22.95
Special Order
Dishwasher Hose Clamp Kit
Part #WH1X2036
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
Dishwasher Clamp Sump – Part Number: WD1X1392
$19.99
Special Order
Dishwasher Clamp Sump
Part #WD1X1392
Drain Solenoid Repair Kit – Part Number: WD21X802
No Longer Available
Drain Solenoid Repair Kit
★★★★★
★★★★★
(1)
Part #WD21X802
This kit includes the armature and link assembly. You may need the solenoid bracket which is sold separately. This valve opens in order for the water to drain out of the dishwasher.
FAUCET ADAPT – Part Number: WD10X21376
No Longer Available
FAUCET ADAPT
Part #WD10X21376
This faucet adapter connects the faucet to the portable dishwasher hose. It comes equipped with the gasket.

Common Symptoms of the 40250149

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Basket was lost
49 of 52 people found this instruction helpful.
  • Joseph from Elmendorf, TX
  • Really Easy
  • Less than 15 mins
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Was this helpful?
Thank you for voting!
Motor was getting noisier every time we used the dishwasher. We knew it was just a matter of time before it totally quit.
48 of 53 people found this instruction helpful.
  • Glenn from Clemmons, NC
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pum p. Reversed the order to install the new one using a longer bracket provided with the new unit. Hooked up the electrical connections last and slid the washer back in place. The washer runs like new now and is not making noise. The replacement part was a perfect match.
Was this helpful?
Thank you for voting!
dishwasher pump valve leaking at shaft
40 of 47 people found this instruction helpful.
  • richard from las vegas, NV
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set, Wrench (Adjustable)
took dishwasher out- put on table to work on-removed wire brace- disconected drain outlet- disconnected top drive seal- removed wire clip connector- removed motor unit----------------
installed new motor/drain unit--used new longer wire brac used adapter to connect electical leads-
tightened clamps and bingo it worked and didnt' leak. good job on the supplying of all the necessary adapers.
Was this helpful?
Thank you for voting!