Revive the wide array of your appliances including your Samsung Refrigerator, Samsung Dryer, Samsung Washer, and even your Samsung Dishwasher with the Tapping Screw, a crucial component engineered by ...
Get your Samsung or Kenmore refrigerator running smoothly and efficiently with this authentic Refrigerator Roller. Designed to fit perfectly and install easily, this high-quality component provides so...
This Samsung door bin is an essential component for every refrigerator. It's specially designed with convenience in mind as it easily attaches to the inside of the refrigerator door, making it ideally...
Having dryer troubles? Look no further! The Samsung Dryer Door Switch is just the solution you've been searching for. This authentic, top-grade replacement part is tailored specifically for your Samsu...
Help your refrigerator cool efficiently again with our genuine Samsung Fan Blade Assembly. This is no ordinary part, it's essential for your refrigerator's optimal performance. If you've noticed your ...
Upgrade your Samsung refrigerator with this high-quality roller wheel axle pin. This sturdy component is instrumental in securing the roller wheel to the bracket, facilitating smooth mobility and oper...
Keep your Samsung or Kenmore refrigerator running smoothly with the Rear Caster Wheel Axle. This high-quality part is specifically designed for optimal fit and function in your appliance. Using this o...
Dive into a flawless and efficient repair experience with the Drain Tube designed specifically for your Samsung and Kenmore refrigerators and Samsung freezers. This premium quality component is expert...
If you're looking to optimize your Samsung refrigerator's storage efficiency, the Samsung Refrigerator Door Bin is perfect for you. Manufactured by Samsung themselves, this accessory can be easily lin...
Enhance the performance of your Samsung, Maytag, or Kenmore refrigerator with the Dispenser Switch. This essential component maintains the optimal functionality of your refrigerator's dispensers. Its ...
$19.95
In Stock
Questions And Answers for 40141003011
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Unplug refrigerator Turn off water supply to ice maker. Unscrew plastic top cover. Unplug all of the electronic connectors Ooen both doors and remove the base plate 3 screws Disconnect the 2 water lines. Have a container to catch the water. Instructions on how to disconnect are on a tag locates in in of the water lines Unscrew the 3 bolts holding the top door hinge and the ground wire Remove the door by lifting up . The water hoses will lift out of the broken base hinge. Remove the broken hinge by pulling straight up. It slides out. Slide the new hinge in. Remount the door by inserting the hoses through the hinge hole. 2 people is helpful. Attach the top door hinge, reconnect the water lines, base cover and Reconnect electronics wires and cover. Good to go
Unplug the refrigerator and turn off the water supply Remove the screws from the freezer top hinge cover and remove it Disconnect all the plugs and the grounding screw that were present under the cover Remove the front bottom grill (under the doors) 3 screws Place the drip pan under the waterline connectors On the freezer side of the connector push the lock into the connector and pull the hoses straight out of the connector Remove the bolts from the top freezer hinge and lift it off Lift the whole freezer door straight up off of the bottom hinge and lay it on a flat surface. Remove the screws from the hinge piece on the bottom of the door and slide it out. Line the new hinge piece up and slide it into place and reinsert the screws. Remove the cam screw from the hinge bottom (still attached to the refrigerator) and remove the can pieces Place the new cam on the hinge bottom and reinstall the screw. The flat side of the cam goes down. Lift the freezer door back into place by lining up the bottom hinge pieces Slide the top hinge back into the freezer top and reinstall the bolts Reinstall the hoses into the connectors on the refrigerator bottom by pushing them in Plug all the connectors together on the freezer top and reinstall the grounding screw Space out the connectors so they will fit under the cover and put the top cover back on. Plug the refrigerator back in and turn on the water supply. Test the water and ice maker then check the bottom connectors for leaks Reinstall the bottom grill and congratulate yourself on a job well done
