3706 Makita Laminate Trimmer - Overview

Sections of the 3706

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 1 of 1]
REPL. 0780TI3706 – Part Number: 3706
REPL. 0780TI3706
This part number matches the current model number 3706
PartSelect #: PS17992367
Manufacturer #: 3706
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Insulation Washer – Part Number: 421479-6
Insulation Washer
PartSelect #: PS10151088
Manufacturer #: 421479-6
$25.71
  Special Order
Field Assembly 115V – Part Number: 595041-4
Field Assembly 115V
PartSelect #: PS10152616
Manufacturer #: 595041-4
$57.16
  Special Order
P. H. Screw M3.5X7 – Part Number: 652008-6
P. H. Screw M3.5X7
PartSelect #: PS10153711
Manufacturer #: 652008-6
$7.44
  Special Order
Spring Washer 5 – Part Number: 942101-7
Spring Washer 5
PartSelect #: PS10155903
Manufacturer #: 942101-7
$7.44
  Special Order
Fan 56 – Part Number: 240044-0
Fan 56
PartSelect #: PS10143838
Manufacturer #: 240044-0
$13.30
  Special Order
Shoe Plate – Part Number: 344964-1
Shoe Plate
PartSelect #: PS10148958
Manufacturer #: 344964-1
$15.72
  Special Order
Shoe Support – Part Number: 344965-9
Shoe Support
PartSelect #: PS10148959
Manufacturer #: 344965-9
$18.98
  Special Order
Pin Cap – Part Number: 417236-8
Pin Cap
PartSelect #: PS10150452
Manufacturer #: 417236-8
This is an authentic Makita replacement part. The pin cap is found in dry-wall cutout tools and wet stone polishers. This part is made of high-quality plastic, and is used to hold the pin in place i...
$7.44
  Special Order
Pin Cap – Part Number: 418067-8
Pin Cap
PartSelect #: PS10150626
Manufacturer #: 418067-8
This is an authentic Makita replacement part for use with angle grinders. This plastic pin cap secures the compression spring in the gear housing. This cap snaps into place so tools are not required t...
$7.44
  Special Order
Brush Holder 5-8 – Part Number: 643552-4
Brush Holder 5-8
PartSelect #: PS10153343
Manufacturer #: 643552-4
This 5 x 8 carbon brush holder is a genuine OEM replacement part used in various outdoor power equipment. It is a small plastic box with a cavity, and it is located near the engine assembly. The brush...
$7.44
  Special Order
Flat Washer 5 – Part Number: 941101-4
Flat Washer 5
PartSelect #: PS10155891
Manufacturer #: 941101-4
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and p...
$7.44
  Special Order
Retaining Ring S-15 – Part Number: 961055-9
Retaining Ring S-15
PartSelect #: PS10156027
Manufacturer #: 961055-9
This authentic retaining ring is supplied by the original equipment manufacturer for use with Makita power tools. It is an identical replacement for a damaged or a missing hardware that was installed ...
$7.44
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Parts Used:
Power Cord
  • Bruce from HILLSBORO, OR
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
4 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!