37-220 (Type 1) Delta Planer Jointer - Overview

This is an authentic manufacturer-supplied part which is specially made for Delta equipment. It is one of the special screws utilized to secure the nameplate. Please refer to appropriate diagrams of your model for the exact location and use of this hardware. This high-quality drive screw is made of durable metal and is sold individually. ...Read moreNote, the screw is installed into a pre-drilled hole. You will need a hammer to secure this component.

This is an authentic Delta replacement part. The bearing is designed by the manufacturer for use in power tools such as sanders, planers, and jointers. This part is made of metal, and is generally used to allow components to spin easily. It may be found in various locations in the machine, depending on model. Please be aware that ther...Read moree are different bearings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this part. This item is sold individually.

This is an authentic Delta replacement part, sourced from the original manufacturer for use with band saws, drill presses, lathes, table saws, and jointers. The metal key is used to shaft and rotating gear or pulley to allow the two parts to rotate in unison. This item is available as an individual replacement part.

This is an authentic Delta replacement part manufactured for use with drill presses, table saws, sanders, and band saws. The special set screw is designed to sit flush with the outer wall of a part assembly. This set screw has multiple applications depending on the model of the power tool, please see model diagram for part location and usage. The set screw is available as an individual replacement part.

This fiber washer fits between parts in select saws, jointers, and other shop tools. It may act as a spacer or cushion and helps keep the parts in the correct position. Replace it if it is cracked, worn thin, hard, or missing. The washer is sold individually. Use the full tool model and type number to guarantee the proper fit. Check the p...Read morearts diagram for its exact location and place it in the same order as the original.